1 Likes2 DownloadsOctober 7, 2024
Instructions
Filament • 0.2mm
MaterialPLA
Layer height0.2 mm
Infill density20 %
SupportsNone
BrimNo
A hose clamp designed primarily for the F30i CPAP mask, but will work for any ResMed mask/hose combo where this may apply. This will also likely work with any standard ~18 mm strap and ~19 mm dia hose.
No supports needed. Use the front or back of the hose clamp as the print bottom.
Categories:
1 Likes2 DownloadsOctober 7, 2024
1 Likes2 DownloadsOctober 7, 2024
Instructions
Filament • 0.2mm
MaterialPLA
Layer height0.2 mm
Infill density20 %
SupportsNone
BrimNo