Vireo Lamp

1.2K downloads · 1 year ago · **Vireo Lamp** We wanted this lamp to feel small and nimble. It has a strong base and a soft smooth

Description

Vireo Lamp We wanted this lamp to feel small and nimble. It has a strong base and a soft smooth shade. The Vireo lamp looks nice in any room, so you can display it on an end table, nightstand, or bookshelf. Print it with other models in our Vireo line to make your home match.

Printing This model downloads as a 3mf, which includes the ideal print settings. Download, select your printer, and click print.

Additional components

E26/E27 Pendant Lights
E26 light bulb (standard North American light bulb)

Filaments Used: Some of these contain affiliate links

White: Bambu Lab Matte White Black: Bambu Lab Matte Charcoal

Assembly

Unscrew the light fixture clamp
Insert the light fixture up through the base
Screw the light fixture clamp back in place (clamping the base)
Place the shade over base aligned with slots
Twist to lock

Community Makes (2)

Going to pick up a roll of crystal for the shades next. Printed on anycubic kobra 3 max

So I was in the middle of printing the shade part, and noticed some graphic design issues that i was able to see in my Orca-Flashforge Slicer. Its on the bottom part about 1.5" and I was able to see it on the top 1.5" section. Not sure if it can be fixed on your end or if its an issue on my end. Thanks

Community Makes (2)

Discussions

Mikeh240910 months ago

So I was in the middle of printing the shade part, and noticed some graphic design issues that i was able to see in my Orca-Flashforge Slicer. Its on the bottom part about 1.5" and I was able to see it on the top 1.5" section. Not sure if it can be fixed on your end or if its an issue on my end. Thanks

PrinterFlashforge Adventurer 5M Pro

Core Essentials10 months ago

Hi there! I would highly recommend using the Bambu Slicer, all the Core Essentials models are printed and tested using the 3mf provided in the download. Those slicer defects are not present in Bambu Lab and it works with most printers out there :)

Mikeh240910 months ago

ok ill give that a try thank you!

thecrazedmonster10 months ago

Going to pick up a roll of crystal for the shades next. Printed on anycubic kobra 3 max

MaterialPLA+

BrimNo

facusenn11 months ago

I love this model, but I think there's a problem, the lid of the bottom part seems to be missing, without that the model seems to be incomplete. Please, attatch the missing file

Core Essentials11 months ago

Hi! Sorry about that! Thank you for noticing that was missing!! I have updated it with the plug. Please re-download the file :)