tracking pixel
Erin B

Popsicle Layered Fidget

by
3DPmom
Follow
Follow
Remix Model
3DPmom
3DPmom
|
Image 8 of 12
Popsicle Layered Fidget 3d model
3DPmom
3DPmom
|
Image 8 of 12
Popsicle Layered Fidget 3d model
2D
3D
Makes
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
Popsicle Layered Fidget 3d model
This model is restricted by licensing terms.ย 

This popsicle droops but never drips ๐Ÿ™Œ๐Ÿผ It's so cute when you add a 'wood' colored stick.

Update 10/19/2024: I added two different 'holders' for this fidget. The first one is a popsicle 'mold' that holds three popsicle layered fidgets (supports are needed for this print). The second one is a 'melted' popsicle holder that holds one popsicle layered fidget (no supports needed). I also included another 3mf file for these holders.

Dimensions of Popsicle: 2 1/4 in. X 4 1/2 in. x 5/8 in. 3D Print Settings Layer Height 0.2mm PLA works great 15% Infill Supports needed under the handle of the popsicle

I have attached a 3mf file which includes supports under the handle and painted in two colors.

Note: I don't recommend scaling the print smaller than 75% due to the already small distance between the layers.

Have fun printing!


69ย Likes164ย DownloadsAugust 17, 2024


69ย Likes164ย DownloadsAugust 17, 2024
This model is restricted by licensing terms.ย 

Instructions

Filament โ€ข 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density15 %
SupportsGrid - Manual
BrimNo