Select a membership plan

Makers
$10.00
/ month

Thank you for becoming a 3DMGK Makers subscriber. Your support is invaluable and enables me to keep creating fresh content.

As a 3DMGK Maker’s subscriber, you have full access to my growing library of models. While your subscription is active, you can download up to 10 models each month.

If you would like a commercial license to sell 3DMGK prints please subscribe to the Commercial Sellers Subscription tier.

Commercial Sellers
$20.00
/ month

Thank you for becoming a 3DMGK Commercial Sellers subscriber. Your support is invaluable and enables me to keep creating fresh content.

As a Commercial Sellers subscriber, you are granted a commercial use license to sell physical 3DMGK models for the duration of your membership. Please Note - You may only sell my models while your subscription is active, i.e., you may not continue to sell my models if you cancel your Commercial Seller subscription.

You will enjoy access to my full library of models and can download up to 30 models per month.

Happy Printing!!

_**_Please note; DIGITAL FILES are not for resale or distribution.

3DMGK
3D MGK135 followers
3D MGK
3D MGK
|
Image 1 of 3
Black Labrador Dog.stl 3d model
3D MGK
3D MGK
|
Image 1 of 3
Black Labrador Dog.stl 3d model
Black Labrador Dog.stl 3d model
Black Labrador Dog.stl 3d model
Black Labrador Dog.stl 3d model

Black Labrador Dog.stl

This model is restricted by licensing terms. 

A Black Labrador with some arty stripes added. I think it came out pretty well and it looks really good up on the wall. This print measures 233 x 233mm.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.


NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE


Filaments Used: PLA Overture Black Transmission Distance: 0.7 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Light Gray Transmission Distance: 0.7 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Charcoal Black At layer #15 (1.28mm) swap to Cement Gray At layer #21 (1.76mm) swap to Grey At layer #25 (2.08mm) swap to Light Gray At layer #33 (2.72mm) swap to Bone White At layer #40 (3.28mm) swap to Jade White for the rest.

NOTE - Picture frame is not included in this download.


Discussions

Black Labrador Dog.stl

36 downloads · 2 years ago in  and 
3DMGK
3D MGK135 followers
This model is restricted by licensing terms.