A black Labrador with some arty stripes added. I think it came out pretty well and it looks really good up on the wall.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Light Gray Transmission Distance: 0.7 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Charcoal Black At layer #15 (1.28mm) swap to Cement Gray At layer #21 (1.76mm) swap to Grey At layer #25 (2.08mm) swap to Light Gray At layer #33 (2.72mm) swap to Bone White At layer #40 (3.28mm) swap to Jade White for the rest.
Frame not included.