Electric Leopard

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 233x233mm in size. The Depth is 5mm. This print uses 9 unique filaments.

NOTE - MY RANGE OF PICTURE FRAMES ARE AVAILABLE SEPARATELY. SEE HERE

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Green Transmission Distance: 2 PLA Overture Cement Gray Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA Overture Matte Light Gray Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions: Start with Black At layer #21 (1.76mm) swap to Charcoal Black At layer #23 (1.92mm) swap to Green At layer #27 (2.24mm) swap to Cement Gray At layer #31 (2.56mm) swap to Grey At layer #33 (2.72mm) swap to Light Gray At layer #43 (3.52mm) swap to Orange At layer #44 (3.6mm) swap to Bone White At layer #53 (4.32mm) swap to Jade White for the rest.

NOTE - picture frame is not included in this download.