This LP-20 V-Core 3.1 Panel Mount is a solution for people who want to streamline their electronics setup, enable easy disconnection of bed wires (or any wires in the enclosure), and honestly just make their printer look kind of cool.

This model allows for quick connections and disconnections of your bed wires or any other wires originating from the electronics panel into the enclosure. This is especially helpful for those, like me, who frequently mod or maintain their 3D printers.

Print settings

• Material: Whatever will hold up in your printer -- ASA/ABS for enclosed -- PLA/PETG for unenclosed
• Walls: 5
• Infill: 20%

How to Mount

1. Install 4 M3 heatset inserts into the curved model where the LP-20 connector attaches
2. Install 4 M3 heatset inserts into the flat mounting bracket that will connect the curved piece to the acrylic panel (this flat mounting bracket goes on the electronics side of the acrylic panel)
3. Run the wires for the female plug through both the curve and the back plate that mounts to the opposite side of the electronics acrylic panel
4. Mount the curved model to the acrylic with the back panel going on the outside of the printer enclosure

If anyone has trouble, I can provide a more detailed installation guide with pictures, just let me know!

Happy printing!