Starfish Flexi V2 Here's V2 of the starfish flexi. After a report of breakage I've completely rebuilt the model. Now this could be heavy handedness but ive made adjustments anyway. I've added approx 0.2mm around all critical areas, there are some minor differences in this version, some of the pieces are different and in different places but it still retains the same functionality. Ive also adjusted the eyes so they sit above model height for a layer pause. for single colour printers. the pauses are as follows. layer 98 for black layer 101 for white If you've not experienced any issue with the previous version then you can continue to use. I would still not recommend silk filaments for any sort of flexi, it's widely known to be weaker than normal pla. If using silk then really look and experiment with temps to make sure adhesion is at its best. Mattes are better but still not as strong as normal pla 0.2 layer, 15% infill