Love Heart Keychain Clicker Love heart keychain Clicker with a selection of the most popular messages. Requires keyboard switches here's what i used from amazon https://www.amazon.co.uk/dp/B0F4X8SY1Q?ref=fed_asin_title Ive uploaded 3 options, the 3mf, a zip file if you want them all, or individually if you want just one. remember you'll need the base too. If you print the tops separately you can add a layer pause at layer 49 for a colour change, for those using a single colour printer. The tops should be supported inside, Manually add supports to the outer ring, not the part where the switch inserts. and set top z to 2.75 for supports to fall away. 0.2 layer height, 15% infill. filaments used, all Bambu Basic matte