Easter Bunny. Print in place easter bunny. high tolerance so comes loose straight off the build plate and stands. Look out for some different heads coming soon. While you can get away with no supports at larger sizes, if you printing at 100% you will want to support the ears just at the base. Use the support paint tool to paint just round the tip. this doe not support any over hangs but just stops the small part coming loose. I printed fine with the super tack plate and if you sure you have great adhesion then should be ok. but ive included manual supports in the 3 mf. Brown bunny is all bambu pla basic, the purple is inanimate with bambu basic. 0.2 layer height, 10% infill