Candy cane Dragon

For this holiday season. Articulated

This was a complicated build. i had a vision to have the body striped.

This of course did then make more work for myself.

the model is made up of 100's of parts, saved into two separate stl's then linked together.

Building this way allows for easy painting in bambu studio or other slicers as even though they are joined it still sees the separate parts.

i have printed the model in 200% scale, 150% and 90%. you may be ok to go smaller but i have not tested. you can go as large as your build plate allows.

0.2 or 0.16 layer height. 10% infill is fine

No supports ignore the floating regions warning.