Collapsing Drill Sword Print-in-Place

39K downloads · 3 years ago · **Drill Sword** _Print-in-Place Version_ This version of the Drill Sword prints complete all as one

This model is restricted by licensing terms.

View license.

Description

Drill Sword Print-in-Place Version

This version of the Drill Sword prints complete all as one piece.

The Replaceable Blade Version is available to my Thangs members.

Printing Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my website. If this is your first time printing, I would suggest you try the test print first.

Printed on the Muldex rep-rap IDEX printer

Support and Licensing If you would like to help support more free models please consider joining my Thangs Membership. Get permission to sell physical copies of my models by joining my Patreon

Tags:

Community Makes (26)

Red&Green&Blue Filament by Lovoon
Came out really nice.

Well, I did it. I made the sword as big as I could in my print bed, had a slight problem with the very top, ran out of filament, and changed to red. Size 175.33 X 175.33 Y 294 Z mm

Printed this on my X1 Carbon, have had the X1C for about 1 1/2 years now and have printed 3-4 swords of similar designs, this one has by far been the most reliable for strength and build quality. I printed this with a "Blue and Pink" silk PLA+ which imo turned out amazing. I highly recommend this print to anybody with a Higher or Lower quality printer as it has been designed amazingly and prints easily in one piece which does require some consistency in tolerance.

Printed this "Collapsing Drill Sword Print in Place" we used Flashforge Silk Dual Color Blue/Rose PLA. We think it turned out amazing!

Worked amazing! This is so far my favourite print printed at 75%

This may help some of you. I pushed the blades in twords the pommel first. This broke the blades loose so they would extend.

Can confirm it does print very nice even with ASA just side note make sure your printer is dialed in for ASA

11h 27m at 40mm/s with Overture Matte Ice PLA. Nice finish, no post-print filing. It's a shame I couldn't attach a video, because slowly collapsing, expanding it looks really cool!

Would defo recommend

V

Creality rainbow filament on Bambu Lab X1C - blade extended

Creality rainbow filament on Bambu Lab X1C

hey love it butt got a little problem these are test prints the large one is 50% the small one is 30%
everything is good butt the small one got no inside and the big one melted to gether bed is on 50 heat nozzle 200 any tips ?

hey i printed this as a test in a smaller version everything went good the big one is a 50% the small one a 30% model butt then this happend on the bottom the small one dont got nothing inside xd and the larger one is like melted to gether my bed is at like 50 pre heat nozzle 200 any tips

PETG-CF for the hilt and BambuLab blue silk for the blade.

matte is pla-cf and shiny is petg.
Printed on my Bambu x1

I took it to work!
Great print using Yousu Laser Glitter filament

Community Makes (26)

Discussions

Firebirdtpg2 months ago

PrinterBambu Lab X1

GrizzledGnome3 years ago

Watch where you sit.

HotFix3 years ago

Creality rainbow filament on Bambu Lab X1C - blade extended

Creality rainbow filament on Bambu Lab X1C - hilt down. 3d model

Creality rainbow filament on Bambu Lab X1C - hilt side. 3d model

HotFix3 years ago

I can't seem to post a comment with my pictures, even tried deleting and recreating to make sure I didn't miss anything.

Thank you so much for making this print for free. My kids have gone crazy for your other swords so I expect I will be joining your membership.

Printed on Bambu Lab X1C w/ 5mm brim w/ .35 gap. Used deburring tool on the + point at the end as it was a little sharp when you try to collapse the blade by hand. It may need a touch up w/ sandpaper to smooth it out completely.

3dprintingworld2 years ago

Glad your kids like it! ☺

periwinkle88893 years ago

pretty good... and good for other things 😏

darcyjfray2 years ago

im sorry what the actual f-

stickbug3 years ago

💀

jedwals62 years ago

would you care to elaborate???

rileyprivate09042 years ago

Look at it again

lennytvproggg2 years ago

sir what?!

unseenchampion2 years ago

what do you mean? like bed inappropriate things

red.iron.cat.man2 years ago

erm excuse me but what the actual fu-

0308zip1 year ago

dammit, they need to add a PG waring to this site now...

james.joshua.milliken1 year ago

plz elaborate

merajrashed2 years ago

woah chill out

emmettjolsen2 years ago

I gotta agree

pickletron91 year ago

pls elaborate

mertbugragokcek3 years ago

I opened all the layers, but I couldn't open the largest layer even though I tried hard.

lazerbrainzz111 months ago

Same thing here, I am using a knife to scrape the bottom part away and try to separate it.

3dprintingworld11 months ago

If its only stuck on the first layer, a exacto knife should work but if its stuck at the layer seam, its much harder.

Metalhead Printing2 years ago

PrinterBambu Lab P1S

vk3konki2 years ago

11h 27m at 40mm/s with Overture Matte Ice PLA. Nice finish, no post-print filing. It's a shame I couldn't attach a video, because slowly collapsing, expanding it looks really cool! Would defo recommend V