Collapsing Drill Sword Print-in-Place

by

3dprintingworld

Follow

Follow

Remix Model

Social

Become a member

2D

3D

Makes

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place - matte is pla-cf and shiny is petg.
Printed on my Bambu x1 - 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place - PETG-CF for the hilt and BambuLab blue silk for the blade. - 3d model

Collapsing Drill Sword Print-in-Place - Great print using Yousu Laser Glitter filament - 3d model

Collapsing Drill Sword Print-in-Place - I took it to work!
Great print using Yousu Laser Glitter filament - 3d model

Collapsing Drill Sword Print-in-Place - Look at that form!!
Great print using Yousu Laser Glitter filament - 3d model

Collapsing Drill Sword Print-in-Place - Watch where you sit. - 3d model

Collapsing Drill Sword Print-in-Place - hey i printed this as a test in a smaller version everything went good the big one is a 50% the small one a 30% model butt then this happend on the bottom the small one dont got nothing inside xd and the larger one is like melted to gether my bed is at like 50 pre heat nozzle 200 any tips - 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place - hey love it butt got a little problem these are test prints the large one is 50% the small one is 30%
everything is good butt the small one got no inside and the big one melted to gether bed is on 50 heat nozzle 200 any tips ? - 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place - Creality rainbow filament on Bambu Lab X1C - hilt down. - 3d model

Collapsing Drill Sword Print-in-Place - Creality rainbow filament on Bambu Lab X1C - hilt side - 3d model

Collapsing Drill Sword Print-in-Place - Creality rainbow filament on Bambu Lab X1C - 3d model

Collapsing Drill Sword Print-in-Place - Creality rainbow filament on Bambu Lab X1C - hilt down. - 3d model

Collapsing Drill Sword Print-in-Place - Creality rainbow filament on Bambu Lab X1C - hilt side. - 3d model

Collapsing Drill Sword Print-in-Place - Creality rainbow filament on Bambu Lab X1C - blade extended - 3d model

Collapsing Drill Sword Print-in-Place - so amazing - 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place - 11h 27m at 40mm/s with Overture Matte Ice PLA. Nice finish, no post-print filing. It's a shame I couldn't attach a video, because slowly collapsing, expanding it looks really cool!

Would defo recommend

V - 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place - Came out extremely well - 3d model

Collapsing Drill Sword Print-in-Place 3d model

Collapsing Drill Sword Print-in-Place - Can confirm it does print very nice even with ASA just side note make sure your printer is dialed in for ASA - 3d model

Collapsing Drill Sword Print-in-Place - This may help some of you. I pushed the blades in twords the pommel first. This broke the blades loose so they would extend. - 3d model

This model is restricted by licensing terms.

View license.

Drill Sword Print-in-Place Version

This version of the Drill Sword prints complete all as one piece.

The Replaceable Blade Version is available to my Thangs members.

Printing Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my website. If this is your first time printing, I would suggest you try the test print first.

Printed on the Muldex rep-rap IDEX printer

Support and Licensing If you would like to help support more free models please consider joining my Thangs Membership. Get permission to sell physical copies of my models by joining my Patreon

Category:

Tags:

3.2K Likes30K DownloadsJuly 21, 2023

3.2K Likes30K DownloadsJuly 21, 2023

This model is restricted by licensing terms.

View license.