3dprintbunny24K followers

Follow

Organic Headphone Stand 3d model

Organic Headphone Stand 3d model

Organic Headphone Stand 3d model

Organic Headphone Stand 3d model

Organic Headphone Stand

1.7K downloads · 2 years ago · A simple headphone stand design with a slight curve on the front face to create a textured finish.

This model is restricted by licensing terms.

View license.

A simple headphone stand design with a slight curve on the front face to create a textured finish.

Prints without supports.

Mine is printed in Polymaker PolyTerra Dual Extrusion Matte PLA (Gradient Wood) which gives a nice wood impression.

Filament link: https://us.polymaker.com/products/polyterra-dual-gradient-pla?aff=826

Tags:

Community Makes (5)

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Community Makes (5)

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Discussions

Tintalon2 years ago

3d model

pimp6 months ago

How did you accomplish this good sir?

lightningr2d22 years ago

ERYONE Carbon Fiber PETG. 0.16 layer height.

ERYONE Carbon Fiber PETG. 0.16 layer height. 3d model

3d model

NadrojTheGinger2 years ago

3d model

Huldar10 months ago

Made it in white PLA, looks good. Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp. Also I had to scale it down to fit on the printer but it's still big enough :)

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :) 3d model

PrinterPrusa MK3S/S+ & MMU2S/3

MaterialPLA

Infill density15 %

SupportsNone

BrimNo

rpeixoto2 years ago

3d model

3d model

3d model

PrinterTwoTrees Sapphire Plus SP-5

MaterialPLA

Layer height0.24 mm

Infill density15 %

SupportsNone

joring807 months ago

NICE

Organic Headphone Stand

1.7K downloads · 2 years ago

3dprintbunny24K followers

Follow

This model is restricted by licensing terms.

View license.