3dprintbunny

Select a membership plan

Monthly billing

17% off

Supporter Plus

Supporter Plus

$8.33

/ month

when billed annually

This supporter plus plan gives you:

A MASSIVE thank you for your support
Access to a small library of exclusive designs including my Hot Air Balloon and Carousel designs
One new exclusive design monthly
Opportunity to suggest and request new designs
Advice and support

Immediate access. Cancel anytime.

17% off

Commercial Print & Sell

Commercial Print & Sell

$9.96

/ month

when billed annually

This membership plan gives you the right to print and sell any of the 3DPrintBunny designs available for download on the Thangs website. It also gives you the right to print and sell any 3DPrintBunny design available on any other website (Printables, Makerworld etc). These rights are limited to the duration of your membership

You also get:

Access to a small library of exclusive designs

this membership does not permit the use of any 3DPrintBunny design to promote products other than the design itself*

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.

3dprintbunny24K followers

Follow

Organic Headphone Stand 3d model

Organic Headphone Stand 3d model

Organic Headphone Stand 3d model

Organic Headphone Stand 3d model

Organic Headphone Stand

1.8K downloads · 2 years ago · A simple headphone stand design with a slight curve on the front face to create a textured finish.

This model is restricted by licensing terms.

View license.

A simple headphone stand design with a slight curve on the front face to create a textured finish.

Prints without supports.

Mine is printed in Polymaker PolyTerra Dual Extrusion Matte PLA (Gradient Wood) which gives a nice wood impression.

Filament link: https://us.polymaker.com/products/polyterra-dual-gradient-pla?aff=826

Tags:

Community Makes (5)

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Community Makes (5)

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :)

Make by user

Make by user

Make by user

ERYONE Carbon Fiber PETG. 0.16 layer height.

Discussions

Tintalon2 years ago

3d model

pimp7 months ago

How did you accomplish this good sir?

lightningr2d22 years ago

ERYONE Carbon Fiber PETG. 0.16 layer height.

ERYONE Carbon Fiber PETG. 0.16 layer height. 3d model

3d model

NadrojTheGinger2 years ago

3d model

Huldar11 months ago

Made it in white PLA, looks good. Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp. Also I had to scale it down to fit on the printer but it's still big enough :)

Made it in white PLA, looks good.
Improvement suggestion would be to add a little chamfer on the bottom and top edges (bottom and top when printing that is) since they are a little sharp.
Also I had to scale it down to fit on the printer but it's still big enough :) 3d model

PrinterPrusa MK3S/S+ & MMU2S/3

MaterialPLA

Infill density15 %

SupportsNone

BrimNo

rpeixoto2 years ago

3d model

3d model

3d model

PrinterTwoTrees Sapphire Plus SP-5

MaterialPLA

Layer height0.24 mm

Infill density15 %

SupportsNone

joring808 months ago

NICE

Organic Headphone Stand

1.8K downloads · 2 years ago

3dprintbunny24K followers

Follow

This model is restricted by licensing terms.

View license.