3dprintbunny24K followers

Follow

Caged Birds String Ornament 2 3d model

Caged Birds String Ornament 2 3d model

Caged Birds String Ornament 2

910 downloads · 3 years ago · Caged Birds String Ornament Print the bird at 0.2mm or lower layer height without supports Print t

This model is restricted by licensing terms.

View license.

Caged Birds String Ornament

Print the bird at 0.2mm or lower layer height without supports

Print the cage at 0.3mm layer height without supports (for Bambu Studio make sure wall generator is set to Arachne)

I also have a single bird version with a different cage which you can find here: https://thangs.com/designer/3dprintbunny/3d-model/Caged%20Bird%20String%20Ornament%201-776913

The stand can be found here: https://thangs.com/designer/3dprintbunny/3d-model/Stand%20for%20Caged%20Bird%20String%20Ornament-776912

Community Makes (2)

Make by user

love it, thanks N.

Make by user

love it, thanks N.

Community Makes (2)

Make by user

love it, thanks N.

Make by user

love it, thanks N.

Discussions

rumori5803 years ago

hello, good job.

alexjsmith6003 years ago

PETG at 40mm/s printed perfectly until the top, the overhangs were too steep

Armour 3 years ago

Thanks for adding the info on Bambu Studio much appreciated.

robarichard3 years ago

How can you actually print the cage? I can't visualize a way the "wires" would ever work out

Pugdad3 years ago

The wires actually printed perfectly. However without supports, it became way too wobbly near the top and it just didnt work. I'm going to try again with some manual support and hopefully it will come out ok.

Caged Birds String Ornament 2

910 downloads · 3 years ago in

Home Decor & Accessories

and

3dprintbunny24K followers

Follow

This model is restricted by licensing terms.

View license.