Ender series printer extended spool holder

This is an extender spool holder for any Ender series printer to allow you to mount wider spools on the printer

Parametric wire spool holder

I designed this a good while ago so the parametric aspect of it might not be super robust. Still use these to this day, you might find this useful too.

SUNLU FilaDryer S1 holder for Ender 3

I designed this quite a while ago when I got a FilaDrier to keep fiberglass nylon filament printable. 
I made it so I could keep the drier and printer together, essentially replacing the included spool holder.
I made this for my Ender 3 Pro, but it should fit on any 20mm aluminium extrusion.

Spool Holder Adapter for Lack Enclosure

spool-holder-adapter v2.stl

Hanging Filament Spool Rack

Center Hanger.stl

Creality Hi Spool holder mount stand

CrealityHiSpoolholderStand.stl

Spool Holder With Lights

part1.stl

Kingroon KP3S top-mounted spool holder collar and z-axis stabilization

Z_Axis_Stabilizer_Tall_Open_Top.stl

3D Pen mynt3d spool holder

mynt3d pen spool holder.stl

Creality Spool Holder Plug

SpoolHolderPlug.stl

Spool Mount for the Peopoly Magneto X

Spool-Mount-MagnetoX-Full.stl

Bambu Lab Filament pulley for carbon x1

Change the direction of the filament to guide it into the machine in a gentle way, placing the spool it a better orientation.

Recommended Material and settings:

PETG – dark color
Bottom and top layer 1.4mm 7 layers
5 layer wall thickness
Gryoid infill at least 15%
Plate: textured PEI plate with glue only on the parts for the calibration extrusions. No brim required.
Order of inner wall/ outer wall/ infill: infill, outside, inside or outside, infill, inside (i’ve switch to the former for most prints but I think I did particular machine with the later, I made this a few months ago and don’t remember, good luck)

Hardware Required
608 sized bearing
Super (cyanoacrylate) glue
1 Meter Bowden Tube

Assembly:
Press bearing into pulley, the glue flange over bearing – dark PETG colors glue better than light colors
Put assembled bearing onto spindle, place bracket over spindle and bracket locator, screw short screw into bracket locator – snug plus tightness is good enough

Insert new bowden tube into printer, the new tube only needs to be and inch or two longer, I recommend cutting it after you have the assembly somewhat located.

place assembly over filament spool holder, insert bowden tube into assembly, sticking out about an inch past it’s place of securing towards the pulley. Enough that the tube can flex a bit as the filament will move around a bit. 

Ensure the bowden tube is graceful in its curving into the machine (to test you can push filament through the tube to test it’s ease of insertion), once satisfied place the threaded block on the underside of the machine and the longer screw through the assembly into the block. Tighten snug plus.

If you don’t know how to use the device at this point you should now have profound feelings of everlasting shame and may whatever deity you worship have mercy upon your wretched soul. 


Other notes:

The bracket is strong enough to pull the bowden tube tight, pick up a full spool of tangled filament, the dry box it is in,  and all your frustrations at a failed print (I wouldn’t know, that’s just what a friend told me) without noticing. 

Singer Spool Pin For 7000 series and Singer One Series

Singer Spool Pin (6).stl

Lie Flat Spool Holder (with bearing)

MUNBYN LABEL HOLDER

Munbyn Label Holder.3mf

Filament Spool Stabilizer

The spool holder that came with my AnyCubic Vyper is not parallel with the ground, causing the spool to naturally slide to one side of the spool holder. 

If there's an overlap in the filament spool, it could cause the spool to jump off the spool holder.

I've created a bracket that easily slides into the spool and locks onto the spool holder. 

-No Support
-20-100% Infill

spool holder

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ender series printer extended spool holder

Parametric wire spool holder

SUNLU FilaDryer S1 holder for Ender 3

Spool Holder Adapter for Lack Enclosure

Hanging Filament Spool Rack

Creality Hi Spool holder mount stand

Spool Holder With Lights

Kingroon KP3S top-mounted spool holder collar and z-axis stabilization

3D Pen mynt3d spool holder

Creality Spool Holder Plug

Spool Mount for the Peopoly Magneto X

Bambu Lab Filament pulley for carbon x1

Singer Spool Pin For 7000 series and Singer One Series

Lie Flat Spool Holder (with bearing)

MUNBYN LABEL HOLDER

Filament Spool Stabilizer

One Piece Spool Holder

Filament Roll Lamp

Horizontal pole holder.stl

Drybox turntable filament dispenser