Astrolabicon Pro // Ziggy

astrolabicon-ziggy.stl

Peg Solitaire -Basic Triangle_ Bambu Lab MMU 3MF

**Objective:**
The objective of Peg Solitaire is to remove as many pegs as possible, ideally leaving just one peg remaining on the board.

**Gameplay:**
Start with the board set up with pegs in all holes, except for one predetermined hole (often the center hole) left empty.
- Pegs can only move horizontally or vertically, not diagonally.
- A peg can jump over an adjacent peg (either horizontally or vertically) to an empty hole on the other side, similar to how pieces move in checkers when capturing.
- The peg that was jumped over is removed from the board and considered "captured."
The game continues by making subsequent jumps, capturing pegs until no more legal moves can be made.
The goal is to make as many jumps as possible, ideally leaving just one peg on the board. If you succeed in leaving only one peg, you've won the game.

**Rules and Restrictions:**
You can only jump over a single peg at a time.
You can't jump over an empty hole.
The peg that is jumping must land in an empty hole after the jump.
The peg being jumped over must be adjacent to the peg making the jump, either horizontally or vertically.

**Winning:**
The game is considered a success if you end up with only one peg left on the board. If you achieve this, you have won the game. If you leave more than one peg on the board, or if no legal moves are possible, you lose the game.

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.
***
***Sculpt by @ChelsC423***

Peg Solitare -Basic Triangle_ Bambu Lab MMU 3MF

the Psychlopath Puzzle

psychlopath-13-8mm-a.stl

The 4 mazing race

Pole hole fillers.stl

Marble Racer Base Set

Marble Race zig zag

KWOB Puzzle // Ziggy A

kwob-ziggy.stl

the CHAIN puzzle // Razor

thechain-razor-v2.stl

Fidj Puzzle // Retro (2 versions)

fidj-retro.stl

Astrolabicon Puzzle // Orb

astrolabicon-orb.stl

Dastardly Dovetail Box (Large)

bigDD_Bottom.stl

Astrolabicon Puzzle // Retro

astrolabicon-retro.stl

Astrolabicon Puzzle // Ripple

astrolabicon-ripple.stl

Astrolabicon Pro

astrolabicon-pro.stl

Lil Chain Puzzle

LilChain.stl

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

What's better than a donut? _SIX donuts!_

---

There's a lot going on in the Donut Factory. Twisting, spinning, snapping... the feel is satisfying, but trying to solve this tricky puzzle might leave you frustrated!

This 'Deconstructed' version is the same as the original, but with a sleek, refined exterior

---

**_Assembly_**

This puzzle is built around a tiny [24mm 2x2x2 puzzle cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889). You will have to remove the keychain part.

Print 8 copies of the included STL. No supports are required, but the overhangs may warp a bit on some printers, so you may want to include a wide brim and increase Z-retraction height for travel moves in your slicer settings.

After printing, use flush cutters to remove the brim and flat bottom.

Magnets are optional, but highly recommended since they improve the puzzle action and make assembly easier as well. You will need 48 3mm x 6mm neodymium magnets. I used E6000 adhesive to glue them into place. Each face has 2 magnets. Make sure the left holes all have the same polarity, and the right holes all have the opposite polarity. Also make sure the magnets are flush to the face. It can help to use the corner of a table or some tool to press the magnets into place. Allow the glue to dry before moving forward.

Next, glue 7 of the 8 sections onto the internal 2x2 cube. Use only enough adhesive to connect the print to the corner of a cube. If too much glue smushes out, your puzzle may not rotate!

Once the 7 parts are in place, load up the marbles. This puzzle was designed for use with these 14mm ABS no hole beads (true dimensions closer to 13.6mm). The easier way to add the marbles is to rotate individual halves 22.5 degrees so the tracks form an S-bend, so you can add all the marbles of one color (8 marbles per ring). Watching my assembly video might make this easier to understand!

After loading the 3 rings opposite of the missing piece, fill the top rings, including the final corner, and then glue that into place. 

The magnets will help hold the parts together while drying, but I like using [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6) to compress the parts as well.

Once the glue is dry, you can remove the bands, and give the puzzles some good twists to rub off any excess E6000 between the faces.

That's it. The Donut Factory is complete!

---

**_Sources for Non-printed Parts_**

**24mm 2x2x2 Cube**
- [Eastsheen Mini 2x2 Keychain Cube](https://speedcubeshop.com/products/eastsheen-mini-2x2-keychain-cube?variant=40210339659889)

**14mm no hole ABS beads**
- [eBay](http://bit.ly/PuzzleBeads)

**or these Chinese Checkers Beads on**
- [Amazon](https://amzn.to/3byXlsV)

**6mmx3mm Neodymium magnets**
- [eBay N52](https://ebay.to/3kMB1A4)*
- [eBay N35](https://ebay.us/iHdF18)
- [Amazon](https://amzn.to/3Qtm6f6)

*Since this puzzle uses so many magnets the N35 strength ones are sufficient. N52 might be slightly overkill and pricey

**E6000 Craft Adhesive**
- [Amazon](https://amzn.to/3OHX22J)

**Silicone Bands for Assembly**
- [0.25" x 4" Grifiti Silicone Bands](https://amzn.to/45QcKz6)

---

_Alright, get to work. These donuts aren't going to make themselves!_ Enjoy :)

marbles

Most Popular Paid of All Time

Categories

Paid

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Astrolabicon Pro // Ziggy

Peg Solitaire -Basic Triangle_ Bambu Lab MMU 3MF

the Psychlopath Puzzle

The 4 mazing race

Marble Racer Base Set

KWOB Puzzle // Ziggy A

the CHAIN puzzle // Razor

Fidj Puzzle // Retro (2 versions)

Astrolabicon Puzzle // Orb

Dastardly Dovetail Box (Large)

Astrolabicon Puzzle // Retro

Astrolabicon Puzzle // Ripple

Astrolabicon Pro

Lil Chain Puzzle

Donut Factory Puzzle (Deconstructed) // 2x2 Twisty Marble Puzzle (24mm inner cube)

Marble Racer Essentials Pack

KWOB Puzzle // Retro

Astrolabicon Pro // Grid

Lil Astro Puzzle // Orb

Kwiblet Puzzle // Echo