Eclipse Pendant Lamp

Eclipse Pendant Lamp.stl

Drill Bit Case or Organizer

SAE_Drill_bit_Organizer_v4 v0.stl

Pendulum - Wall clock 3D

Pendulum.stl

Towel hanger

Let’s be honest, who is really taking the time to spread out a kitchen towel tidy over a bar? And If you are using a hook - it is often a struggle to find the loop and the towel is probably still wet after a few hours.
This simple and well working solution is a mix between the two options. Just throw the towel over and don’t worry about it not drying or falling down.
 
You can either screw or glue it onto your wall or cabinet. There are various glue or tape products for wall fixation out there. I used 3M Tape.

Diameter of the two screw holes: 5,5mm

Size: ca 175 × 75 × 50 mm
Don't forget to post your makes!

**Print settings**
Required build volume: 180 x 180 x 60 mm
Material usage: 40g
Print time: 4h – 5h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Small self-watering plant starter pot

This is a simple design of a small plant starter pot that allows you to fill a cavity in the bottom with water to keep the soil moist for over a week ensuring that your new seeds or seedlings never go dry.

This is an original design and not remixed but I've see similar pots out there from which I took inspiration. Apologies for not giving specific credit.

This print consists of 2 parts: the pot and the insert. I've printed several of these and they've all been water-tight, but (of course) print and use at your own risk. Here are my print settings:

(PrusaSlicer 2.3)
Layer Height: .2 mm
First Layer: .2 mm
Vertical shells--perimeter shells: 2 minimum
Horizontal shells--solid layers: 5 top, 4 bottom
Ensure Vertical Shell Thickness (selected)
Infill: 15% (DOESN'T MATTER as the shell settings and thickness should ensure 100% infill regardless)


Self watering plant starter pot

Elephant watering can 

watering can.stl

Dremel Bits Holder MAX

More places for more of your little bits!  

XL Bauble

Threaded top.stl

Realistic Mushroom Planter!!

RealisticMushroomPlanter.3mf

TWINIA V2 - minimalist planter with propagation tube holder.3mf

NESPRESSO CAPSULE HOLDER FOR 3 UNITS

Two Bluey Beds

Bluey Bed Large (repaired).stl

House Plant Trellis, Set of 10

House Plant Trellis_1-10.stl

Gyroid Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


Crab Chopstick Holder

This crab was designed to simply hold your chopsticks but I guess it will also hold pens or pencils.

The part is designed to print without supports but be careful with the legs and adhesion to the bed on the first layer. I used a raft to help with this.

home & garden

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Eclipse Pendant Lamp

Drill Bit Case or Organizer

Pendulum - Wall clock 3D

Towel hanger

Small self-watering plant starter pot

Elephant watering can

Dremel Bits Holder MAX

XL Bauble

Realistic Mushroom Planter!!

TWINIA V2 - minimalist planter with propagation tube holder.3mf

NESPRESSO CAPSULE HOLDER FOR 3 UNITS

Two Bluey Beds

House Plant Trellis, Set of 10

Gyroid Tealight Holder

Crab Chopstick Holder

LENTRA Planter with Legs | Modern 3D Printable Plant Pot with Drainage Holes

Multiboard Stubby Screwdriver Holder

Mini Stands - Two Sizes

ToolGrid - 6mm Dremel Bit Stand V1.1

CLAYTIS Vase – Minimalist Textured 3D Printable Vase I Modern Wavy Decor Vase