Print in place handle with a hinge .stl

simple handle with a hinge. Print the whole thing then remove the brim and bend the handle a few times to loosen the hinge. It prints already assembled and is suprisingly smooth and sturdy. The rotational range is about 210 degrees. I added only a few supports for the elevated flat parts. Print at low infill with thicker walls depending on the expected load. The hinge is very strong and it hardly flexes when being twisted. for addidtional strength, two machine screws and nuts can be slid into the holes in the hinge. Tolerances in the hinge are pretty high so it should print well on most printers. It can be down-scaled within reason if needed.

I printed mine with black PLA at 50C Bed and 195C nozzle with 100% cooling to better handle the overhangs
the hinge is very squeaky but the noise gets reduced the more the hinge is used, a little bit of thick lubricant can be added to mitigate the issue

Monitor Savior // Shoe Mount Lock for SmallRig

I made this simple part to cover the opening of the cold shoe mount on my SmallRig cage. Two [M4 x 10mm screws](https://amzn.to/2ybL6RS) fasten it into place.

For [SMALLRIG NATO Rail Handle](https://amzn.to/2XtISYI) or similar.

Eibos Easdry Replacement Door Finger Pull

EibosEasdryFingerPull.step

Modern Classic Kitchen Cabinet Drawer Pulls

Modern Classic Cabinet Handels NO SUPPORTS.obj

Gearfinity Improved Crank Handle

crank_arm-2.STL

WSE6070SB_Door_Handle_Coupler.stl

Handle for M2,5; M3 and M4 tappers

Nut.stl

Medium Mini Painting Handle for 25x25mm Square Bases with Magnets

Mini.Painting.Handle.for.25x25mm.square.bases.Medium.5x2mm.Magnet.stl

 Iphone case Grip for Game

Grip Iphone Case by Reamkase .stl

Modern Drawer Knob

Knob for cabinet doors or drawers - Simple and ergonomic design - no fancy theme, no sharp edges ;)

**Dimensions**
Width: 36 mm
Height: 25 mm
Mounting Hole
Diameter: 3.7 mm (fits M4 screws)
Depth: 20 mm

**Printing**
PLA/PLA+ works very well. This model should be printable without any support or brim. Four or more perimeters/walls may be needed - depends on layer height. I used 0.2 mm layer height for the print.

Use “Variable layer height” (Prusa Slicer) for a smoother finish.

20% Infill


Executioner Axe K1C Door Handle

Executioner Door Handle K1C.stl

IKEA VAPPEBY Chunky Handle

VAPPEBY_handle.stl

Screen door handle

handle.3mf

Ski Boot Tote Handle

Handle.STL

Vacuum Cleaner Narrow Part

Vacuum.STL

HANDLE WITH CARE STENCIL FOR PAINTING

Remix of 4x6 Picture Frame Template.stl

Picture Frame Template for Thangs official Remix Challenge

4x6 Picture Frame Template.stl

Drawer - Cabinet Pull - Knife Pennywise 96mm (3.75in)

Drawer - Cabinet Pull - Knife Pennywise 96mm (3.75in).stl

Lid Handle Latch for Large Storage Tote

tote handle.stp

spiral handle.obj

handles for my kitchen. weary nice and sturdy.
printed:
0.16 height
0.3 with
40 mm/s

handle

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Print in place handle with a hinge .stl

Monitor Savior // Shoe Mount Lock for SmallRig

Eibos Easdry Replacement Door Finger Pull

Modern Classic Kitchen Cabinet Drawer Pulls

Gearfinity Improved Crank Handle

WSE6070SB_Door_Handle_Coupler.stl

Handle for M2,5; M3 and M4 tappers

Medium Mini Painting Handle for 25x25mm Square Bases with Magnets

Iphone case Grip for Game

Modern Drawer Knob

Executioner Axe K1C Door Handle

IKEA VAPPEBY Chunky Handle

Screen door handle

Ski Boot Tote Handle

Vacuum Cleaner Narrow Part

HANDLE WITH CARE STENCIL FOR PAINTING

Remix of 4x6 Picture Frame Template.stl

Drawer - Cabinet Pull - Knife Pennywise 96mm (3.75in)

Lid Handle Latch for Large Storage Tote

spiral handle.obj