Nikon F Camera

Nikon_F_1973.glb

GoPro 9 & 10 Battery Cover

This is a simple and quick to print battery case for GoPro 9 and GoPro 10.

**Printing**

Simply print it with 100% infill - No supports needed.


GoPro Battery Cover

Nintendo 3DS xl Display Stand

A Nintendo 3DS xl Display Stand for your handheld.

Happy printing.

Estikuma

If you are feeling generous, please consider buying me a [coffee](https://www.buymeacoffee.com/estikuma) :)

Instagram: [Click Here](https://www.instagram.com/estikuma/)

Youtube: [Click Here](https://www.youtube.com/channel/UCP1AcuaH3VgFQMCsB4b-0zQ)

[Estikuma.com](https://estikuma.com/)

Cable guide

The hot end cables were dragging along the bed & pushing on the heated bed cables, causing the bed to move up and down during a print. (Ender 3 v2). 

So, I designed this little guide to hold the hot end cables up slightly so they don't interact with the bed. One side of the hook is chamfered so that the cables don't touch any sharp edges as they move. The guide slots into the frame of Ender/other 3d printers on the back left side. 

If you want to cable tie the cables into the guide, then just make sure it has enough slack for the hot end to reach the top right of the print area before tying it. 

It prints without supports, just make sure it's oriented with the long flat side down to the bed. Doesn't require supports.


Nintendo switch dock diglett 

Here is Nintendo switch dock diglett, a super fun decoration for your Nintendo switch dock fits both normal and oled version of the Nintendo switch docks. No supports needed, Printed at 50ms with 0.4 nozzle.

Omega Headset Stand

omega top.stl

Block Xbox Controller Stand

We are hopeful this will be a great addition to your catalog of products.  

The inspiration was to create a stand that was subtle enough to fit into any decor and turn the controller into "art" and not just a place for it to sit.

I think there is a huge opportunity to sell these in different filaments such as wood, carbon fiber, etc. and really stand out.

We printed with 3 perimeters, 10% adaptive cubic infill.   Print time took ~2hr 27m. 

Please remember to give credit when listing this item on any online outlet where you use the model:
"Model courtesy of 3D Design Bros"

**You are not authorized to use our pictures**

Thanks so much for the support.

OPTOMA UHD50 Projector Ceiling Mount

Projector_Mount.stl

iPhone 15 Pro Max Easy Printing Case

Funda_iphone_15_Pro_Max_PLA.STL

Single Axis Tilt for FPV Camera via Servo

Right Camera Stand and Servo Mount v3.stl

Touchpad Stand 2.STL

Created in Solidworks holds a G6, portrait or landscape. Designed with a hole for charging in portrait mode, with a cutout for the charging cable to go out the back. The tray is 15mm deep to fit some protective covers. I use an 90 degree USB C 3.1 adapter to eliminate stress on the charging cable, but it can be used without one. Here is a link to an adapter.
https://www.amazon.com/dp/B07XZ1TSJS?psc=1&ref=ppx_yo2_dt_b_product_details
I uploaded two versions in 3mf and stl formats

Gameboy DMG-01 Display Stand

GoPro extension bars

gopro_extend_100.STL

Smartphone Bed

_While nighttime scrolling may seem like a harmless activity, doing so could be interfering with your ability to fall asleep and stay asleep.

The body relies on circadian rhythms to know when to initiate sleep versus when to feel awake. The circadian rythm is a 24-hour biological process that mimics the rise and fall of the sun. A specific part of the brain called the suprachiasmatic nucleus uses external cues such as light to determine if it is time for sleep. At night, the body normally reacts to the darkness by releasing melatonin, a hormone that signals that it’s time to sleep.

However, our brains are very sensitive to light, and the blue light emitted from cell phones and other electronic devices delays melatonin production. Lack of melatonin can make it difficult to fall asleep, which can lead to insomnia and fatigue over time.

Studies also suggest that blue light can decrease the amount of time the body spends in slow-wave sleep and rapid eye movement (REM) sleep. These two sleep stages are important for consolidating memories and regulating mood. (source -  [https://thesleepdoctor.com](https://thesleepdoctor.com))_

The best way to get some good, quality sleep, is putting your smartphone to bed as well.

That's why I designed this smartphone bed. Making a habit to put you smartphone to bed when you are going to sleep might help you sleep better.

It's big enough to accomodate most smartphone form factors and has a little cut-out for a charger.

It consists of 4 different parts. The bed & 4 legs. The 4 legs are square, but 2 of the 4 legs have a rounded corner to match the rounded corner of the footboard.

Make sure you fit all legs before glueing them in.

**Print settings**

- No supports
- 15% infill
- Arachne wall generator recommended, otherwise the tolerence of the holes and pins for the legs might get too tight.

_ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Companion subscription._

consumer electronics

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Nikon F Camera

GoPro 9 & 10 Battery Cover

Nintendo 3DS xl Display Stand

Cable guide

Nintendo switch dock diglett

Omega Headset Stand

Block Xbox Controller Stand

OPTOMA UHD50 Projector Ceiling Mount

iPhone 15 Pro Max Easy Printing Case

Single Axis Tilt for FPV Camera via Servo

Touchpad Stand 2.STL

Gameboy DMG-01 Display Stand

GoPro extension bars

Smartphone Bed

3D Printed Bluetooth Headphones

Square Lens Hood 49mm Helios 44-2

Camera Lens Holders // Peg Anything

Nintendo Switch Screen Protector

Nintendo Switch Cartridge Slider - Short (12 slots)

Top Down Desk Camera Mount Rig