Woven Wreath Form - Resin

Woven Wreath Form - Resin.stl

Christmas Gift Boxes – Festive Knitted-Style Decor

подарок.3mf

Diamond Ornament Container (Closed)

Display Only do not print.stl

Christmas Tree Ornament

Layer 1.stl

Woven Wreath Form - FDM

Woven Wreath Form - FDM.stl

Spiral Christmas Balls

#Summary
These are a quick, fun, and are very lightweight. Each ball has the same cross-section and twist. The main differences are the size and number of arms.

* Large ball: 80mm diameter, weighs less than 17g, takes about 6 hours to print
* Small ball: 56mm diameter, weighs less than 9g, takes about 3 hours to print

These are part of my [Christmas Collection](https://www.thingiverse.com/dazus/collections/christmas-collection).

I designed these using Affinity Designer (for cross-sections) and Blender (everything else).

The arms need support at multiple points to keep from warping and breaking if you're using an FDM printer. To make this quick and easy, I provided a version of each ornament with built-in supports. I still had Cura add supports, but only where the balls touch the build plate. For details, se the print settings below.

#Print Settings
##Basics

* Layer Thickness: 0.15mm
* Walls: 0.4mm (1 line)
* Top/Bottom thickness: 0.45mm (3 layers)
* Build Plate Adhesion: Brim

If you have holes in your print (from the thin walls), I recommend increasing flow and/or print temperature. You might also decrease print speed and travel speed (I use 30mm/second and 80mm/second).

##Infill

Infill is optional. They should print OK without it, but I added some just at the bottom of each ball. I used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill (Lines pattern) for the first 51mm for the large ball and 37mm for the small ball.

##Supports

I recommend using the versions of the balls with built-in supports. You'll still need a little support for the first few layers (where the ball touches the build plate), but my supports make printing the arms of the ball easy. You can remove my supports with your bare hands (no tools) and they leave little or no marks on the print.

I recommend printing these with Cura-generated supports "touching buildplate" with a 60-65 degree overhang angle and a brim for the supports.

For support infill, use Concentric pattern, 10% density. Roof density of 75%, floor density of 50% works well and releases cleanly.

The small ball doesn't need any supports for the inside roof. I found it printed very cleanly. 

The large ball printed well enough for my taste without supports for the roof. It print was a little rough, but it only shows if you pick the ornament up and look up from the bottom of the ornament. When it's hanging on a tree, you'll never see that part of it. There's enough space between the arms of the ornament that you could get tools in to cut up and remove supports if you want to add them, but I don't think it's worth the effort.

Christmas Castle

STL Demo Placeholder (Use Master File Instead).STL

Ornamental Christmas Ball Box – Decorative Holiday Gift Holder

top.stl

Baby Yoda Christmas Tree Decoration Upgraded

This an upgraded version of the [Baby Yoda Christmas Tree Ornament](https://thangs.com/mythangs/file/547312).
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

christmas Ornament

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Woven Wreath Form - Resin

Christmas Gift Boxes – Festive Knitted-Style Decor

Diamond Ornament Container (Closed)

Christmas Tree Ornament

Woven Wreath Form - FDM

Spiral Christmas Balls

Christmas Castle

Ornamental Christmas Ball Box – Decorative Holiday Gift Holder

Baby Yoda Christmas Tree Decoration Upgraded

Not So XL Grinch

The Toy Factory (Bundle Version)

SWIRL CHRISTMAS TREE / CHRISTMAS DECOR / DECOR

Not Soo XL Santa

Ice Crystal Christmas Ornament #1

Rudolph Duck

Peppermint Ornament - Christmas Day 11 - Candy

Not So XL Rudolph

Grinch Hand Christmas Ornament

Knitted Cat Butt Ornament / 3MF Included

XL Grinch