Pusheen - Sitting - Fan Art

Pusheen - Sitting - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Stitch 3D Printer Model - STL File - Cute Disney Collectible - 3D Print Alien Figure - Desk Decor - 

babystitchnoeyes.3mf

Bulldog - Wall Decoration

Bulldog.stl

Screw In, Free-Standing Foot

Screw In, Free-Standing Foot.stl

Spooky Melting Skull Candles –  Halloween Decor Tea Light Candles

left_candle.stl

crab pen holder

Cute crab pen holder, modelled after the Ahnitol Crab

crab.stl

Single Corner - Multiboard Beam

Corner - Multiboard Beam.stl

Baby Groot

Glasses case

150_50_25_Bottom.stl

Koffing - Pokemon - Fan Art

Koffing - Pokemon - Fan Art
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.

Short Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Short Bony Basilisk: 
https://than.gs/m/936954
Loose Tolerance Short Bony Basilisk: 
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

Tight Tolerance Long Bony Basilisk: 
https://than.gs/m/936921
Medium Tolerance Long Bony Basilisk: Coming Soon
Loose Tolerance Long Bony Basilisk: 
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Collapsing Archangel Blade Print-in-Place

**Collapsing Archangel Blade**
_Print-in-Place Version_

This version of the Archangel Blade prints complete all as one piece. Its my easiest sword to print, there is 1mm of clearance between the blades. 

The [Replaceable Blade Version]( https://than.gs/m/923865) is available to my Thangs members. 

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld)


25x12.5 mm Hook (Friction-Fit Insert)

25 x 12.5 mm, Push-Fit Hook.stl

articulated voxel dragon

articulated voxel dragon
————————————————————

**printing settings**
scaling: at least 100% (120% recommended) 
nozzle: 0,4
layer height: 0.2
wall line count: 2
infill: 10%
support: no 


--------------------------------------------------------
**If you would like to sell my models pleas consider subscribing to my Patreon at:** https://www.patreon.com/pressprint



this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_
__________________________________________

happy printing



Donatello -TMNT Rubber Duckie 

D-TMNT_RubberDuck.stl

Faceless Snap (DS Part B)

Faceless Snap Screw on (DS Part B) - Loose.stl

Spider-Man bust (fan art)

The Horizontal Rail

Planter Attachment.stl

Super Fancy Remix of the Hextraction Game Board

5-15 Plate.stl

 Flexible Snake with Texture for 3D Print

New Look of Snake
Texture Add for 3D PRinting

New Version of,
https://www.thingiverse.com/thing:5029537

Enjoy your Print & Share images with us

Y

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pusheen - Sitting - Fan Art

Stitch 3D Printer Model - STL File - Cute Disney Collectible - 3D Print Alien Figure - Desk Decor -

Bulldog - Wall Decoration

Screw In, Free-Standing Foot

Spooky Melting Skull Candles – Halloween Decor Tea Light Candles

crab pen holder

Single Corner - Multiboard Beam

Baby Groot

Glasses case

Koffing - Pokemon - Fan Art

Short Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Collapsing Archangel Blade Print-in-Place

25x12.5 mm Hook (Friction-Fit Insert)

articulated voxel dragon

Donatello -TMNT Rubber Duckie

Faceless Snap (DS Part B)

Spider-Man bust (fan art)

The Horizontal Rail

Super Fancy Remix of the Hextraction Game Board

Flexible Snake with Texture for 3D Print