vijugasta.obj

wavy pattern pot. standard settings 3 parameters .Creative Commons Attribution-NonCommercial 4.0 International Public License

Captive Gemstone Container (Large)

The faceted “gemstones” in these containers are captive, meaning that once printed they rotate freely within the wall. 

See here for video: https://youtu.be/U29BH97z4Jc 

This design is particularly suited to printing with multicolour filament as rotating the gemstones allows for visualization of the different filament colours.

This model features the tricolour “Silk Red & Yellow & Blue” filament by Eryone.

Once printed, allow the print to cool. Wiggle each gem back and forth until it breaks from the small internal supports.  Twist it a few times until it turns smoothly.

Note: Pictures below show small and medium sizes only.

See here for other “Captive Gemstone Containers” in the series:


Braided waist vase v2.stl

little vase i made testeing on out other CAD softwares alot people liked it so i decided to upload it 

Cybervase | Sci-Fi Greebled Vase

CyberVase.stl

Wacky Wicker Gerbera Bubble 2

This “Wacky Wicker Gerbera Bubble 2” is part of a playful kitchenware set featuring warped and asymmetrical wicker patterns.

See here for video: https://youtu.be/505m3MXVl1A 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. This set is made even more challenging with the addition of extra angles and contours.

I made this set to test out my new Lulzbot TAZ Pro, and it did quite well! Use the designs as a “torture test” for your own 3D printer.


Wacky Wicker Gerbera Bubble 1

This “Wacky Wicker Gerbera Bubble 1” is part of a playful kitchenware set featuring warped and asymmetrical wicker patterns.

See here for video: https://youtu.be/505m3MXVl1A 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. This set is made even more challenging with the addition of extra angles and contours.

I made this set to test out my new Lulzbot TAZ Pro, and it did quite well! Use the designs as a “torture test” for your own 3D printer.


Wacky Wicker Broccoli Basket

This “Wacky Wicker Broccoli Basket” is part of a playful kitchenware set featuring warped and asymmetrical wicker patterns.

See here for video: https://youtu.be/505m3MXVl1A 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. This set is made even more challenging with the addition of extra angles and contours.

I made this set to test out my new Lulzbot TAZ Pro, and it did quite well! Use the designs as a “torture test” for your own 3D printer.


Rib Knit Round Bowl

This knitted round bowl features a “rib knit” pattern. A rib knit is formed by alternating regular and purl stitches.

See here for video: https://youtu.be/nda4gtQC9Ws 


Abstract Vase (Vase No. 10)

This is an abstract patterned vase.

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam and no support.

This one has some shallow walls so it might not be watertight halfway up (depending on your print settings).

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 4 bottom layers and only 1 outer wall.

If you like this, take a look at my other models :)

Andor Vase.stl

Trashcan with Lid

Dustbin can.STL

voronoi pot.obj

no rounded edge on the throat. it looks better to me personally.
printed :
0.2 mm layer height
0.4 mm layer with
50mm/s

flower pot plate higher.obj

this plate its higher then first one . more practical.
printed :
0.2 mm layer height
0.4 mm layer with
50mm/s

Greek Mosaic Vase

Suspended Vase v2

VASO.stl

Suspended Vase V1 - Decoration

Pasta Vase (Large)

This vase is part of a set of vases inspired by pasta. Each vase is made with twelve interwoven hollow tubes.

See here for video: https://youtu.be/dszT0SkozdU

See here for others in the set:
Small: https://social.thangs.com/m/408292 
Medium: https://social.thangs.com/m/408303 
Large: 


Pasta Vase (Medium)

This vase is part of a set of vases inspired by pasta. Each vase is made with twelve interwoven hollow tubes.

See here for video: https://youtu.be/dszT0SkozdU

See here for others in the set:
Small: https://social.thangs.com/m/408292 
Medium:
Large: 


Pasta Vase (Small)

This vase is part of a set of vases inspired by pasta. Each vase is made with twelve interwoven hollow tubes.

See here for video: https://youtu.be/dszT0SkozdU

See here for others in the set:
Small:
Medium:
Large: 


Vase_Plug.stl

This is a plug to cover your vase hole 
No supports needed I printed at 10% Infill but you can print it at any percent Infill.

Vase

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 40 new models

Captive Gemstone Container (Large)

Braided waist vase v2.stl

Cybervase | Sci-Fi Greebled Vase

Wacky Wicker Gerbera Bubble 2

Wacky Wicker Gerbera Bubble 1

Wacky Wicker Broccoli Basket

Rib Knit Round Bowl

Abstract Vase (Vase No. 10)

Andor Vase.stl

Trashcan with Lid

voronoi pot.obj

View 12 new models

View 47 new models

Suspended Vase v2

Suspended Vase V1 - Decoration

Pasta Vase (Large)

Pasta Vase (Medium)

Pasta Vase (Small)

Vase_Plug.stl