Twisted Tree Pencil Holder

Tree Vase 01.STEP

Penrose P3 Pods

Display Do Not Print.stl

Bubble Vase

Here is a vase with the walls shaped like bubbles.

Preferable to print in vase mode with line width 0.5/0.6 

Pop Garland

Pop Garland Display only Do Not Print.stl

Droplet Vase💧

This droplet vase is great to put fake, miniature flowers into. I work hard on these designs, so if you like my designs, a follow would be very helpful. Let's try to reach 200 downloads by the end of 2022.

corsette vase tattooed 

Second version, scale up or down as you see fit

Hourglass Bottle | Vase Mode

Bottle.stl

Bonsai - little plant self watering vase 180x70

Bonsai SWV - all.stl

Garter Knit Round Bowl (Vertical)

This bowl is part of a pair of knitted round bowls featuring a “garter knit” pattern. A garter knit is formed by alternating rows of regular and purl stitches.

In one bowl, the alternating rows are oriented vertically, in the other they are oriented circumferentially.

See here for video: https://youtu.be/y0uVxO7lLik 

See here for other Garter Knit Round Bowls:
Circumferential: https://social.thangs.com/m/507033 
Vertical:


Use supports for the outside bottom of the bowl. The top inside of the bowl has bridges and overhangs that cannot be supported. The print fails will be small and mostly hidden, and you can clean up any visible flaws with a file.


Garter Knit Round Bowl (Circumferential)

This bowl is part of a pair of knitted round bowls featuring a “garter knit” pattern. A garter knit is formed by alternating rows of regular and purl stitches.

In one bowl, the alternating rows are oriented vertically, in the other they are oriented circumferentially.

See here for video: https://youtu.be/y0uVxO7lLik 

See here for other Garter Knit Round Bowls:
Circumferential:
Vertical:


Use supports for the outside bottom of the bowl. The top inside of the bowl has bridges and overhangs that cannot be supported. The print fails will be small and mostly hidden, and you can clean up any visible flaws with a file.


Fast Hexagonal Vase-Container - can Print in Vase Mode

Small and Simple Hexagonal Vase/Container with oscillatory movement.
Dimensions:
90mm W x 80mm L x 100mm H
Can be printed with Vase Mode/High Flow.
Hope you enjoy it.


Algaepots

algaepots

Serac Vase 140mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: https://social.thangs.com/m/491867 
Serac Vase 120mm: https://social.thangs.com/m/491883 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Serac Vase 120mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: https://social.thangs.com/m/491867 
Serac Vase 120mm: 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Serac Vase 100mm

This piece is part of a set of four abstract vases inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: https://social.thangs.com/m/491853 
Serac Vase 100mm: 
Serac Vase 120mm: 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Serac Vase 80mm

This piece is part of a set of four vases is inspired by glacial seracs. A serac is a block or column of glacial ice, often formed by intersecting crevasses on a glacier. They are dangerous to mountaineers since they may topple with little warning, so be sure to put them on a sturdy surface.

See here for video: https://youtu.be/BL3vv8oyQlk 

The center hole is approximately 40mm in diameter, large enough to hold an electric tealight or suitably sized glass container. Approximate heights are indicated below and in the file name.

See here for others in the set:

Serac Vase 80mm: 
Serac Vase 100mm: 
Serac Vase 120mm: 
Serac Vase 140mm:

The models shown are printed with the following types of tricolour silk filament by Eryone:

Serac Vase 80mm: “Red & Yellow & Blue”
Serac Vase 100mm: “Red & Blue & Green”
Serac Vase 120mm: “Red & Gold & Purple”
Serac Vase 140mm: “Gold & Silver & Copper”


Knitted Stocking Container.stl

Warm your winter supplies with this cozy Knitted Stocking container! 

See here for video: https://youtu.be/jKJB6-62kV4 

The toe, heel and body of the stocking use a regular knit geometry. The upper trim uses a rib knit geometry.

Print without supports. You will get some small areas of print fail on the inside and lower edges, but this will either not be visible or easy to clean up with a file if you choose.


Snap Star

Snap Star Display only do not print.stl

Ripple Trees

Ripple Trees Display only do not print.stl

Wicker Bowl (Vertical Stakes)

This model is part of a set of two styles of round wicker bowls. In wicker weaving, the “stakes” are the rigid structures around which thinner “strands” are woven. The files are named for the orientation of the stakes in the model.

See here for video: https://youtu.be/GwzDR4dE8Fw 

Others in the set:
Circumferential Stakes: https://social.thangs.com/m/475733 
Vertical Stakes: 

Wicker is a very challenging geometry for 3D printing because of the many bridges and overhangs. It is often difficult or impossible to set up supports for all overhangs. 
The models shown are printed without supports, and I invite you to try the same! You will get some areas of print fail that will add to the uniqueness of the print and can be cleanup up easily with a file if needed.


Vase

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Twisted Tree Pencil Holder

Penrose P3 Pods

Bubble Vase

Pop Garland

Droplet Vase💧

corsette vase tattooed

Hourglass Bottle | Vase Mode

Bonsai - little plant self watering vase 180x70

Garter Knit Round Bowl (Vertical)

Garter Knit Round Bowl (Circumferential)

Fast Hexagonal Vase-Container - can Print in Vase Mode

View 14 new models

Serac Vase 140mm

Serac Vase 120mm

Serac Vase 100mm

Serac Vase 80mm

Knitted Stocking Container.stl

Snap Star

Ripple Trees

Wicker Bowl (Vertical Stakes)