GEN2 RAILS - LARGE

GEN2-QL Rail - Single - LARGE.stl

Lobe Planter ~ Collection Series

Lobe_Planter_3241.stl

Doric Column // Display Stand

Large_Column_Mid_Straight.stl

GEN2 Decor Filament Drawer - 185 (STANDARD)

prusaslicer-filament-chip-dividers.3mf

Hex Tray / Bin Large w/Divider

Hey Tray / Bin Large w/Divider

XYZ_CallibrationCube.stl

This is a small and simple XYZ calibration cube for checking the dimensional accuracy of your printer.   The cube has X, Y and Z written along their respective axes.

Once printed either use an accurate ruler or callipers to measure the dimensions of the print. The original model size is 20mm*20mm*20mm however you may wish to resize it to be bigger (or smaller). 

Once you have measured your dimensions you may want to adjust the steps or steps per mm for each axis in your printers firmware - This may or may not be possible depending on your printer. 

To do this you will need to find your current Steps per mm, and then have your observed dimension and expected dimension.

To calculate the new Steps per mm you will need to do:

(Expected/Observed)*Current Steps per mm = New Steps per mm

It is also good as just giving a gauge of how well your 3D printer works with small over hangs and flat faces to check for Z-Banding or ghosting!

Snap Together Spiderweb Napkin Holder

WebNapkinHolder_Sides.stl

Customizable Box

box-22x13x71.stl

4x6 Picture Frame Template.stl

Picture Frame Template for Thangs official Remix Challenge

Gridfinity X-Acto Knife Holder

x-acto full (dont print).stl

GEN2 Tilt Drawer Pro - 115

115-1w-2h-tilt-drawer-case.stl

GEN2 Gridfinity Magnet Drawers - STANDARD

GEN2 2x1 Gridfinity Magnet Double Drawer - STANDARD.stl

COASTER DISPENSER | For TULLE COASTERS

COASTER DISPENSER - FRONT.STL

ClampDock Vertical

ClampDock 1v00a_102 Slider.stl

ClampDock Accessory - Charging Tray

ClampDock charging tray 1v00a.stl

CREATEK S-111 | 3D Printable Storage Box (STL)

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

Table

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEN2 RAILS - LARGE

Lobe Planter ~ Collection Series

Doric Column // Display Stand

GEN2 Decor Filament Drawer - 185 (STANDARD)

Hex Tray / Bin Large w/Divider

XYZ_CallibrationCube.stl

Snap Together Spiderweb Napkin Holder

Customizable Box

4x6 Picture Frame Template.stl

Gridfinity X-Acto Knife Holder

GEN2 Tilt Drawer Pro - 115

GEN2 Gridfinity Magnet Drawers - STANDARD

COASTER DISPENSER | For TULLE COASTERS

ClampDock Vertical

ClampDock Accessory - Charging Tray

CREATEK S-111 | 3D Printable Storage Box (STL)

Gridfinity sticky note holder

Kirby Napkin Cover - Multipart

Geometric Coasters (Includes Three Variants)

GEN2 2x0.5 Parts Drawer V2 - 15s - STANDARD.3mf