This a general purpose charging tray large enough for phones and tablets together. It snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges. You can use it for charging or as a stand for your devices.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

This download contains the ClampDock Accessory only. You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

Print Settings

For the best results, I suggest the following: Material = PLA / PETG Nozzle = 0.4mm Layer Height = 0.2mm Line Width = 0.4mm Wall Count = 4 (1.6mm) Top and Bottom Layer Count = 5 Detect Thin Walls = ON Wall Generator = Arachne Infill = 40% (Cubic) Brim = Should not be needed Support = No Print orientation = As per the STL/3MF files.

Related Links

The ClampDock is available here… https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs: https://www.logicalplanet.com/

Revisions and Updates I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.