Frankenstein's Skull

Skull.stl

Tombstone wall art grave marker wall decor Halloween cemetery decoration

TOMBSTONE.stl

Skull In Love

Skull with Hearts.stl

Pixi the Pumpkin dragon *Commercial Version*

pumpkin_sassiepals_commercial.stl

Skull with Crown - Home Decor

skull crown.stl

Skull in Beanie - Home Decor

Skull beany.stl

Skull with Shades - Decoration

skull shades.stl

Skulls Wall Decor

Skull 2 plain.stl

Dragon Skull - Wall Decoration

Dragon Skull 1.stl

Laughing Skulls Dice Tower

Laughing Skulls.3mf

Skulls in the Sky

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyTerra Lava Red Transmission Distance: 1
	PLA PolyLite Lemon Yellow Transmission Distance: 6.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #7 (0.64mm) swap to Azure Blue
	At layer #9 (0.8mm) swap to Lava Red
	At layer #12 (1.04mm) swap to Lemon Yellow
	At layer #17 (1.44mm) swap to White for the rest.


Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


Skull Family

Decorate your home with this spooky family of skulls!

no supports required

Skull Mug Holder - Decoration

Dragon Skull - closed jaw - Halloween Decoration

Dragon Skull - Open Jaw - Decoration

SPOOKY SKULL SHADOW BOX - STRING MODEL PAINTED FOR BAMBULAB MMU

This is the first of a Series of String Models I call the SKULLY SHADOW BOX... Not only did I make the strings, I also made the frame look like an old picture frame to hang it on the wall.

this is the painted version for bambustudio

Print at 0.2 layers, you must use Arachne wall generator OR thin wall detection for this to work.

When done you should have a Skull floating in space.

ENJOY.

Like and follow

PLEASE DO NOT SELL MY MODELS. IF YOU WANT TO SELL JOIN ME ON HERE IN THE MEMBERS AREA OR ON PATREON.

I love @3dprintbunny ... as a designer I have been trying to figure out how she does what she does for months. I finally have something that I am super proud of. SO PLEASE GO FOLLOW, LIKE AND SUPPORT HER TOO. She is a smart and talented modeler.

SPOOKY SKULL SHADOW BOX - STRING MODEL

Skull Phone Holder - Home Decoration

Skull Bowl - Halloween Decoration

Hueforge-SkullRoses

My first hueforge model “Skull Roses”, hope you enjoy.

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PrintedSolid Jessie pla Black Transmission Distance: 0.3
PrintedSolid Gunmetal Gray Transmission Distance: 5.7
Sunlu Gray Transmission Distance: 6.5
CC3D Bone White Transmission Distance: 8
PrintedSolid White Transmission Distance: 9.8

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gunmetal Gray
At layer #14 (1.2mm) swap to Sunlu light Gray
At layer #20 (1.68mm) swap to Bone White
At layer #23 (1.92mm) swap to White for the rest.
 

Skulls

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Frankenstein's Skull

View 41 new models

View 62 new models

View 23 new models

Skull with Crown - Home Decor

Skull in Beanie - Home Decor

Skull with Shades - Decoration

View 118 new models

Dragon Skull - Wall Decoration

Laughing Skulls Dice Tower

Skulls in the Sky

Skull Pop Beads

View 13 new models

Skull Mug Holder - Decoration

Dragon Skull - closed jaw - Halloween Decoration

Dragon Skull - Open Jaw - Decoration

View 89 new models

Skull Phone Holder - Home Decoration

Skull Bowl - Halloween Decoration

Hueforge-SkullRoses