Boba Fett Christmas Tree Decoration

This is a Boba Fett Helmet Christmas Tree Decoration. You can find his rival and friend The Mandalorian here: [The Mandalorian Christmas Tree Decoration](https://thangs.com/designer/frikarte3D/3d-model/The%20Mandalorian%20Christmas%20Tree%20Decoration-567052?manualModelView=true)
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 13 (0 to 2.6mm) = Green
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = White
22 to 25 (4.4 to 5mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

The Mandalorian Christmas Tree Decoration

This is a The Mandalorian Helmet Christmas Tree Decoration. You can find his faithful companion Grogu (Baby Yoda) here: [Baby Yoda Christmas Tree Decoration Upgraded](https://thangs.com/mythangs/file/547316)
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer with Cura Slicer:
0 to layer 13 (0 to 2.6mm) = Silver
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = White
22 to 25 (4.4 to 5mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Pikachu - Xmas Ornament

xmasPikaOrnamentGorro.stl

Jupiter ‘Guru’ - Teacher of the Gods

Rope Weave Xmas Decoration (easy no support print)

tree.stl

FHW: 2022 Modern Christmas Ornament R v1.1

hello Tribe,

please enjoy this Christmas yuletide ornament, be safe and happy holidays.

Cheers
Maker Millwright

happy christmas.stl

Dad christmas ornament 2022 (2).stl

Hello, I made this christmas ornament to show your dad how much you love them. I made it with Tinkercad, and because it's like my third print I think it turned out rather well all things considered. Thanks.

cHRISMAS gYRO oRNAMENT.stl

Christmas ornaments, baubles, "Christmas bulbs" or "Christmas bubbles" are decoration items, usually to decorate Christmas trees. These decorations may be woven, blown (glass or plastic), molded (ceramic or metal), carved from wood or expanded polystyrene, or made by other techniques.

Sheep Christmas Ornament

This is the small sheep remixed as a Christmas Ornament 

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

Snowflake2022.stl

Sapin contemporain.stl

Christmas Tree Candle or Led Holder

StarTree-full.stl

Baby Yoda Christmas Tree Decoration No Circle

This a no circle version of the [Baby Yoda Christmas Tree Decoration](https://thangs.com/mythangs/file/547312).
In that version i removed the ball circle and there's only the Baby Yoda with a Christmas Hat.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 5 (0 to 1mm) = Brown
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Baby Yoda Christmas Decoration No Circle

Kaleidoscope Christmas Balls with Stems

2022 kaleidoscope ball 2.stl

Christmas Coaster - Snow 1

Base_de_Copos_Snow1-1 color.stl

Advent Wreath 🎄

I am sorry that I haven't posted in two weeks, but I have many things planned. This is a festive advent wreath that you can put birthday candle into. I'd appreciate some feedback while you are here because it would be incredibly helpful.

Trees in a tree on a tree Christmas ornament

**RECOMMENDED PRINT SETTINGS**
Brim or Raft: No
Supports: No
Orientation: Standing up
Layer Height: 0.1mm
Infill: 40%
Speed: 60mm/s
Nozzle Size: 0.2mm
Material: PLA or ABS
Green PLA (seen in pictures): https://geni.us/greenPLA


**Learn Fusion 360:** https://ProductDesignOnline.com

**PDO YouTube:** https://www.youtube.com/productdesignonline

This model was created by Kevin Kennedy (Product Design Online) and is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

Religion & Belief

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Boba Fett Christmas Tree Decoration

The Mandalorian Christmas Tree Decoration

Pikachu - Xmas Ornament

Jupiter ‘Guru’ - Teacher of the Gods

View 13 new models

View 16 new models

happy christmas.stl

Dad christmas ornament 2022 (2).stl

cHRISMAS gYRO oRNAMENT.stl

View 25 new models

Yeah, Another christmas Ball

Snowflake2022.stl

Sapin contemporain.stl

Christmas Tree Candle or Led Holder

Baby Yoda Christmas Tree Decoration No Circle

Kaleidoscope Christmas Balls with Stems

Christmas Coaster - Snow 1

Advent Wreath 🎄

Trees in a tree on a tree Christmas ornament

Christmas Tree