Diamond Christmas Bell

This is the third in this year's Christmas bell series. It prints quickly ad easily. Use a nice medium toned silky, metallic or multicolored filament to show off the geometry - or use translucent filament to make it glow.

This is based on my closed lattice, spiral and open lattice bells. It's roughly the same size (slightly taller) with a new loop at the top and a new lattice pattern. 

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**PRINT SETTINGS**
* Walls: 0.4 - 0.8 mm (I used 0.4 mm for the clear bell and added an alternating extra line for the opaque bell)
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. However, the first layer is just a single width circle, so you may need to add a brim or raft.
* Supports: None. I designed this to print cleanly without them.

Closed Lattice Christmas Bell

This is the third in this year's Christmas bell series. It prints quickly ad easily. Use a nice medium toned silky, metallic or multicolored filament to show off the geometry - or use translucent filament to make it glow.

This is based on my spiral and open lattice bells. It's roughly the same size (slightly taller) with a new loop at the top and a new lattice pattern. 

###Not to be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

*** PRINT SETTINGS***
* Walls: 0.4 - 0.8 mm (I used 0.4 mm for the clear bell and added an alternating extra line for the opaque bell)
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. However, the first layer is just a single width circle, so you may need to add a brim or raft.
* Supports: None. I designed this to print cleanly without them.

Voronoi_christmas_tree

Build your own Planetary Snowman

This Snowman has a planetary gear on the bottom so when you hold the center ball and spin the bottom ball his head rotates at 4 times the speed.  If you hold the center ball and spin the head, the bottom will rotate at 3 times slower. If you hold it by the head and spin the bottom or middle ball, it will spin freely, like a bearing. 

It is 133mm tall 100% and does not require supports. I used a .4mm nozzle at .2mm layer heights but a bigger nozzle or layers should work. If you scale it down it will make it more difficult to print but scaling it up will actually make it easier. I think it will scale up to at least 200% if not more without issue. 

Its hollow to save material, be sure not to add any details that extend to far into the inside as it could mess us the mechanics or create a part that should have supports. 


Planetary Snowman

Grinch Cookie Cutter

Christmas Coaster - Santa Hat

Base_de_Copos_santa_1color.stl

Christmas Coaster - Gift

Base_de_Copos_presente_1color.stl

Christmas Coaster - Tree 3

Base_de_Copos_arvore3_1color.stl

Christmas Coaster - Snow 2

Base_de_Copos_snow2_1color.stl

Christmas Coaster - Snow 3

Base_de_Copos_snow3_1color.stl

Christmas Coaster - Snow 4

Base_de_Copos_snow4_1color.stl

FHW:2022 Modern Christmas Ornament Ornament z

Hello Tribe

This may be distasteful, but I do enjoy it and I will be adding this like a-bomb to my Christmas tree. PLease enjoy

Cheers
Maker Millwright


Darth Vader Christmas Tree Decoration Upgraded

This is an upgraded version of [Darth Vader Christmas Tree Decoration](https://thangs.com/designer/frikarte3D/3d-model/Darth%20Vader%20Christmas%20Tree%20Decoration-547322?manualModelView=true). It's a diferent concept of the Darth Vader Mask.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer using Cura "Pause at Height":
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Christmas Ornament Collection 2022

Christmas Orn 5-2022.stl

Christmas Tree Shoe Topper (stand)

A friend of mine wanted to adorn the top of their Christmas tree with an Air Jordan 1. Enter, whatever this is!  

This device is meant to discretely hold up the shoe of your choice.

PS.  Don't judge the photos.  I'm not a sneaker head, so i didn't have anything pretty to model on this stand.


Remix of Hinged Christmas Tree (Print in Place).stl

**RECOMMENDED PRINT SETTINGS**
Brim or Raft: No
Supports: No
Orientation: Standing up
Layer Height: 0.1mm
Infill: 40%
Speed: 60mm/s
Nozzle Size: 0.2mm
Material: PLA or ABS
Green PLA (seen in pictures): https://geni.us/greenPLA


**Learn Fusion 360:** https://ProductDesignOnline.com

**PDO YouTube:** https://www.youtube.com/productdesignonline

This model was created by Kevin Kennedy (Product Design Online) and is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

Hinged Christmas Tree (Print in Place).stl

kirby christmas ornament no hat

Small Reindeer Ornament

Our small Reindeer we made into a christmas ornament 

Santa Baby Yoda Christmas Decoration

This a remix of the [Baby Yoda Christmas Tree Decoration No Circle](https://thangs.com/designer/frikarte3D/3d-model/Baby%20Yoda%20Christmas%20Tree%20Decoration%20No%20Circle-551142?manualModelView=true).
In that version I changed the clothes to be able to print white the suit in white and red to become a Santa Claus suit.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer using Cura with "Pause at Height":
0 to layer 5 (0 to 1mm) = Red
6 to 9 (1.2 to 1.8mm) = Green
10 to 13 (2 to 2.6mm) = Black
14 to 17 (2.8 to 3.4mm) = White

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

Spiral Christmas Ornament

top half.stl

Christmas Tree

This is an easy-to-print, modern Christmas tree. Looks really well as a winter decoration. It can be printed in vase mode as well as standard mode.

---

**Recommended print settings**

- vase mode: yes
- bottom solid layers: 7
- extrusion width: 1 mm

Printing it with 1 mm extrusion width makes it solid enough.

This model prints nicely with fuzzy skin feature on it. It adds additional strength and hardiness to the walls.

When printing in standard mode, seam position should be set to aligned.

The tip of the tree should be printed slowly to avoid unwanted deformations.

Religion & Belief

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Diamond Christmas Bell

Closed Lattice Christmas Bell

Voronoi_christmas_tree

Grinch Cookie Cutter

Christmas Coaster - Santa Hat

Christmas Coaster - Gift

Christmas Coaster - Tree 3

Christmas Coaster - Snow 2

Christmas Coaster - Snow 3

Christmas Coaster - Snow 4

View 15 new models

Darth Vader Christmas Tree Decoration Upgraded

Christmas Ornament Collection 2022

View 14 new models

Remix of Hinged Christmas Tree (Print in Place).stl

kirby christmas ornament no hat

Small Reindeer Ornament

Santa Baby Yoda Christmas Decoration

Spiral Christmas Ornament

Christmas Tree