ARTICULATED DRAGON KEYCHAIN 001 - Print in place - STL Files

DRAGON 001 - KEYCHAIN - WITH HOLE.stl

 Cute Flexi Bear Grizzly (Toy, Keychain & Magnet)

Flexy bear grizzly keychain.stl

Solar Dragon

Cinderwing3D Solar Dragon Winged.stl

Tiny Peacock

Cinderwing3D Tiny Peacock.stl

Print-in-Place Bells

Print-in-Place Bell - Diamond.stl

Peacock Dragon

Cinderwing3D Winged Peacock Dragon 2 Color.3mf

Rengoku’s Print-in-Place Collapsing Katana

RENGOKU-PNP.stl

Tiny Hippogriff

Cinderwing3D Tiny Hippogriff.stl

Articulated Pokémon - Rayquaza 

Full plate curled.stl

Print-in-Place Collapsing Zanpakuto

**Ichigo's Collapsing Sword**
_Print-in-Place Version_

This version of the sword prints complete all as one part. 

The [Single Color](https://than.gs/m/956007) and the [Multi-Color Single Extruder](https://than.gs/m/955809) Replaceable Blade Versions are available to my Thangs members.

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

The chain is a little hard to print, make sure you use a brim.  I also had to print a little slower at a lower layer height to keep it from getting knocked over.

Printed on the [Muldex](https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer. 
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld)


Ichigo's Print-in-Place Collapsing Sword

Snapdragon Dragon

Cinderwing3D Snapdragon Dragon Winged 4 Color.3mf

Planetary Tree - Mini

PLANETARY TREE - MINI.stl

Articulated Print-In-Place Christmas Nutcracker v1

Nutcracker TOP.stl

Cyber Cat: Universal Headphone Holder 

Colored_3MF_Cyber_Cat_Headphone_Holder_Deluxe_v2.3mf

Giyu’s Print-in-Place Collapsing Sword

GIYU-PNP.stl

Collapsing Harusame

HARUSAME-PNP.stl

Broadsword v2 - Hilt 2 - Print-in-Place

**Collapsing Broadsword v2 - Hilt 2**
_Print-in-Place Version_

This updated version of the broadsword print complete all as one piece. 

The [Replaceable Blade Version]( https://than.gs/m/947386) and the [Single-Extruder Multi-Color Version](https://than.gs/m/948189) is available to my Thangs members.

**Printing**
Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print collapsing swords on my [website.](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Mulcore](https://github.com/3dprintingworld/Mulcore) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models please consider joining my Thangs [Membership.](https://than.gs/u/35786?plans=true) Get permission to sell physical copies of my models by  joining my [Patreon](https://www.patreon.com/3dprintingworld)

Planetary Quick Container

**Planetary Quick Container**

When you hold the middle section on this container and turn the bottom section, it opens up quickly due to the planetary gears on the bottom.

**How it works**
The bottom outside is the ring gear, the outer top part is the carrier, and the inner part is the sun gear.  Rotating the bottom segment while holding the top segment results in the planetary gears rotating inner shell at a 3:1 ratio.  

**Print instructions**
It’s designed for a .4mm nozzle, .2mm layer heights, no supports at 100% but there is some bridging.  There is a 6mm hex hole in the sun gear to free up the gears if necessary.

**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed.

Printed on the [Muldex]( https://github.com/3dprintingworld/Mulcore) Core-XY 3D Printer. 
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


Fidget Medal Trophy (customize and spin!)

Fidget Medal - 1st.stl

Collapsing Broadsword v2 Print-in-Place Multi-Color

GREAT SWORD-GUARD 1.stl

PrintinPlace

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

ARTICULATED DRAGON KEYCHAIN 001 - Print in place - STL Files

Cute Flexi Bear Grizzly (Toy, Keychain & Magnet)

Solar Dragon

Tiny Peacock

Print-in-Place Bells

Peacock Dragon

Rengoku’s Print-in-Place Collapsing Katana

Tiny Hippogriff

Articulated Pokémon - Rayquaza

Print-in-Place Collapsing Zanpakuto

Snapdragon Dragon

Planetary Tree - Mini

Articulated Print-In-Place Christmas Nutcracker v1

Cyber Cat: Universal Headphone Holder

Giyu’s Print-in-Place Collapsing Sword

Collapsing Harusame

Broadsword v2 - Hilt 2 - Print-in-Place

Planetary Quick Container

Fidget Medal Trophy (customize and spin!)

Collapsing Broadsword v2 Print-in-Place Multi-Color