tracking pixel
3D Printing World

Planetary Quick Container

by
3dprintingworld
Follow
Follow
Remix Model
3dprintingworld
3dprintingworld
|
Image 1 of 5
Planetary Quick Container 3d model
3dprintingworld
3dprintingworld
|
Image 1 of 5
Planetary Quick Container 3d model
2D
3D
Makes
Planetary Quick Container 3d model
Planetary Quick Container 3d model
Planetary Quick Container 3d model
Planetary Quick Container 3d model
Planetary Quick Container 3d model
This model is restricted by licensing terms. 

Planetary Quick Container

When you hold the middle section on this container and turn the bottom section, it opens up quickly due to the planetary gears on the bottom.

How it works The bottom outside is the ring gear, the outer top part is the carrier, and the inner part is the sun gear. Rotating the bottom segment while holding the top segment results in the planetary gears rotating inner shell at a 3:1 ratio.

Print instructions It’s designed for a .4mm nozzle, .2mm layer heights, no supports at 100% but there is some bridging. There is a 6mm hex hole in the sun gear to free up the gears if necessary.

Remove the brims There are four built in brims attached to the sun gear that will need to be removed.

Printed on the Muldex Core-XY 3D Printer.


Support and Licensing If you would like to help support more free models please consider joining my Thangs Membership To get permission to sell physical copies of my models, consider joining my Patreon


300 Likes605 DownloadsAugust 12, 2023


300 Likes605 DownloadsAugust 12, 2023
This model is restricted by licensing terms.