NEMA17 blinds motor

ring-gear.stl

1:4 reduction bevel gear assembly Nema17.stl

assembly example.stl

Nema17 fan heatsink mount.3mf

I found Wired1's solution https://www.thingiverse.com/thing:29572 most suitable for my use. Then the heatsink I ordered arrived and I wanted to add that in for an additional cooling effect. 

(FYI, the addition of a heatsink to the motor only reduced the motor temperature by around 5℃ to 8℃ for me, whereas adding a fan lowered the motor temperature by around 20℃.)

Minor changes:
1. Increased the depth to allow <12mm heatsink to be pasted on. 
2. Added some holes in the hope of increasing airflow. Inconclusive so far.
3. Changed the mounting hole to take M3x3 (M3 OD 4.5mm, 3mm depth) threaded inserts.

*****

Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s 

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you) 

AliExpress affiliate links:
NEMA17 heatsink
https://s.click.aliexpress.com/e/_DEoMaQp

Threaded brass inserts 
https://s.click.aliexpress.com/e/_DB22QVP

Amazon affiliate links:
NEMA17 heatsink
https://amzn.to/3Nruji9

*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

NEMA17

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

NEMA17 blinds motor

1:4 reduction bevel gear assembly Nema17.stl

Nema17 fan heatsink mount.3mf