10 mm Mid Thread, Flat Head, Small Thread Hole, Shank Bolt

10 mm Mid Thread - Flat Head - Small Thread Hole - Shank Bolt.stl

Stackable Desk Tray Type 4

Stackable Desk Tray Type 4 Large.STEP

Shutter Box - Coffin

Demo - All Files.stl

Gridfinity | Caliper Holder - Harbor Freight

Zack's caliper holder is intended for a Mitutoyo caliper.  For those of us with a Harbor Freight Digital caliper, something else is required, so here it is.

Gridfinity Caliper Holder - Harbor Freight

12oz Shot Shell Can Cup - Boom!

12oz Shot Shell Cups V2.step

Folding Phone Stand

Folding Phone Stand.stl

Lattice Hearts

Lattice Heart - Diamond.stl

Christmas Tree Boxes

Christmas Box DISPLAY ONLY.stl

Jango Fett

Wearable Jango Fett helmet 

STL-files for 3D-printing

The antenna is able to rotate up and down

1:1 Scale (Life Size)

Mandalorian Helmet:
https://thangs.com/mattiashellberg95/Mandalorian-Helmet-19529

Check out my other models at: https://thangs.com/mattias.hellberg.95

Jango Fett.STEP

3x3 MU - MultiBoard Octagon Plate

3x3 Single - Multiboard Border Tile.stl

Mega Planetary Egg Container

**Mega Planetary Egg Container**

This egg shaped container prints-in-place and uses a planetary gear stage on the bottom which allows it to open 4 times faster than its turned. 

 This a scaled up version of the original [Planetary Egg Container]( https://social.thangs.com/m/53994), but I have decreased the clearances before scaling it up so they are the same as the original size. 

Its roughly 180mm tall, scaled up 160% of the original.  If you wanted to go bigger I think it would be safe to scale the model even more but I haven’t tried it.  The biggest downfall to making it bigger might be that it would be hard to turn due to the gear ratio. 

**How it works**
The bottom outside shell is the ring gear, the outer top shell is the carrier, and the inner shell is the sun gear.  Rotating the bottom shell  while holding the top shell results in the plant gears rotating inner shell at a 4:1 ratio.  36 teeth of the sun, divided by 12 teeth of the planet, plus one.

**Print instructions**
Prints in place, designed for a .4mm nozzle, .2mm layer heights, no supports at 100%.  There is a 6mm hex hole in the sun gear to free it up the gears if necessary. 
**Remove the brims** 
There are four built in brims attached to the sun gear that will need to be removed, I did so easily with side cutters

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer.
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


Mini Traffic Cone - Stackable - Multicolor .3mf

traffic-cone.stl

War Crimes Criminal

 Police Officer Lego

Police Officer Lego.STEP

16-Piece Full Size Brachial Plexus Model

Full Model - Display Only.stl

Money Bank - Piranha Plant Super Mario Bros

$$ Venus Flower.stl

Alphonse Elric Bust (Fullmetal Alchemist: Brotherhood)

AlphonseBust-DISPLAYONLY.stl

HexBin System

BOB_Large_HexBin_Base.stl

Dennis the Minecraft Wolf.stl

Type II Phaser - Star Trek Cosplay Prop Kit | No Supports, No AMS, No Glue

Plate 1 - Army Blue.stl

N

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

10 mm Mid Thread, Flat Head, Small Thread Hole, Shank Bolt

Stackable Desk Tray Type 4

Shutter Box - Coffin

Gridfinity | Caliper Holder - Harbor Freight

12oz Shot Shell Can Cup - Boom!

Folding Phone Stand

Lattice Hearts

Christmas Tree Boxes

Jango Fett

3x3 MU - MultiBoard Octagon Plate

Mega Planetary Egg Container

Mini Traffic Cone - Stackable - Multicolor .3mf

War Crimes Criminal

Police Officer Lego

16-Piece Full Size Brachial Plexus Model

Money Bank - Piranha Plant Super Mario Bros

Alphonse Elric Bust (Fullmetal Alchemist: Brotherhood)

HexBin System

Dennis the Minecraft Wolf.stl

Type II Phaser - Star Trek Cosplay Prop Kit | No Supports, No AMS, No Glue