This borb is based on that cute little bird in World of Warcraft - Pepe! I've included a colored file done in Bambu.

Layer Height: 0.2
Infill: 10%
Walls: 3

No supports needed

The Pepe in my video was printed at 90%. I also tested him at 60% without issue.

I set my flush volumes to 0.7 - you may want to adjust them depending on your preference.

Pepe the Borb - World of Warcraft Colored.3mf

Pepe the Borb - World of Warcraft.stl

The Borbs are back! This set is based off of Great Horned Owls, Ravens, and Bearded Vultures. I've included a bambu 3mf & a figure version for all three borbs.

I love it when you tag me in your makes! You can find me on Instagram, Tiktok, & Facebook. 

Your purchase gives you the right to download and print the design for commercial use. You do not have permission to resell or redistribute the digital files. Physical prints of the design can be sold. Included is an authorized seller logo for you to use. 

Print Settings:  

3 walls
10% infill (I use gyroid)
Supports are only required for the Bearded Vulture (specifically on the tip of his beak & along the bottom of his beak)

Use brim around the feet if you experience adhesion troubles. 

If you have any questions, please send me an email: rachel@printasauruslv.com

The Borbs: Ominous Friends - Great Horned Owl, Raven, Bearded Vulture (Commercial Use)

Raven - Ominous Friends.stl

The Borbs are back! This set is based off of Great Horned Owls, Ravens, and Bearded Vultures. I've included a bambu 3mf & a figure version for all three borbs.

I love it when you tag me in your makes! You can find me on Instagram, Tiktok, & Facebook. 

Your purchase gives you the right to download and print the design for your personal use. You do not have permission to resell or redistribute those digital files. Prints of the design cannot be sold without authorization. If you'd like to sell commercially, please check out my alternate listing for commercial use.

Print Settings:  

3 walls
10% infill (I use gyroid)
Supports are only required for the Bearded Vulture (specifically on the tip of his beak & along the bottom of his beak)

Use brim around the feet if you experience adhesion troubles. 

If you have any questions, please send me an email: rachel@printasauruslv.com

The Borbs: Ominous Friends - Great Horned Owl, Raven, Bearded Vulture (Personal Use)

It's Appa! My son is a huge Avatar fan, so I made this little Appa as a surprise for him & his class.

 
**Print Settings**
- Layer Height: 0.2
- Walls: 3
- Infill: 10%
- Slow down for overhangs
- The Appas I printed for goodie bags were done at 60% & the larger is 110%

**For multicolor printing**
- I recommend using supports for multicolor Appa. Otherwise you will see some drooping on his chin & tail. 
- Flushing volume of 0.65 worked well for me. You may want to adjust depending on your colors/what you're comfortable with
- Use flushies (like a fidget cube, bolt, etc) and/or print multiple to reduce your waste

**And thank you for downloading! Hope you love Appa!
**


Appa Figure - Avatar: The Last Airbender

Appa.stl

My favorite dinosaur - Printasaurus! I've used them as flushies, filament samples, and printed several to sell on my online shop. I'd love to see your finished Printasaurus! Tag me on instagram (@printasauruslv)

Printasaurus is an easy print & requires no supports. I do slow down for overhangs to get a clean look on his toes and chin.

I've included a pre-painted .3mf version for Bambu.

Your purchase gives you the right to download and print the design for commercial use. You do not have permission to resell or redistribute the digital files.

Layer height: 0.2 or less
3 walls
15% infill (I prefer gyroid)

For filament samples, I print at 80%.
The larger version that I sell in my shop is printed at 150%

Printasaur - Commercial Use

PrintasaurusV1.stl

My favorite dinosaur - Printasaurus! I've used them as flushies, filament samples, and printed several to sell on my online shop. I'd love to see your finished Printasaurus! Tag me on instagram (@printasauruslv)

Printasaurus is an easy print & requires no supports. I do slow down for overhangs to get a clean look on his toes and chin.

I've included a pre-painted .3mf version for Bambu.

Your purchase gives you the right to download and print the design for your personal use. You do not have permission to resell or redistribute those digital files. Prints of the design cannot be sold without authorization. If you'd like to sell commercially, please check out my alternate listing for commercial use.

Layer height: 0.2 or less
3 walls
15% infill (I prefer gyroid)

For filament samples, I print at 80%.
The larger version that I sell in my shop is printed at 150%

Printasaur - Personal Use

Here are the price signs that I use at my events. I use the height range paint to change the color & really make the prices stand out.

Included are signs for: 2, 3, 5, 7, 8, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, & 60, 70, 80, 90, & 150

If you'd like to create your own and want to match these signs, the font I used is called Bubble Boddy Fat

Layer height: 0.2 
2-3 walls
10-15% infill (I prefer gyroid)

Price Signs

3PriceSignV1.stl

25PriceSignV1.stl

35PriceSignV1.stl

It's Relaxasaurus! There's a couple options for you to choose from. Happy Relaxasaurus is cute and can be resized to whatever you like. Relaxasaurus Holder can be used for utensils, pens, sharpies, etc. The 100% size will hold an object with a diameter of 16.5mm or less. 

If you need to resize the holder version, here's how I do it in bambu: 
- Right click Relaxasaurus and add a negative part cylinder. set the cylinder to 16.5mm 
- Select Relaxasaurus again and resize. if you click on the cylinder after resizing him, it'll show you the diameter he can hold. 
- Once done, delete the negative part

Print Settings:
2-3 walls
10-15% infill 
Slow down for overhangs


Relaxasaurus - Happy & Holder Versions

RelaxasaurusHappy.stl

Hi, I'm Rachel! I started 3D printing in 2023. It's created a bit of an addiction with learning 3D modeling and printing all the cute things I can find. You can follow my journey on instagram or facebook (@printasauruslv).

Feel free to send me a message if you have any questions. I can be reached on here, my socials, or printasauruslv@gmail.com

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

printasauruslv

Achievements

Seedling

Up and Coming