Lychee fruit shaped pot mold 

Liczi mold (with extra screw holes).stl

Valkiria | Cabdle holder

half1.stl

Drop | Cement ashtray

cenicero2.stl

Heart planters | Cement mold

left.stl

Cube Tomato Mold v.3

Tomato Box v.3.2.stl

Cube Tomato Mold v.2

Box v.2.2.stl

Concrete candle holder “Gugelhupf”

**A beautiful concrete candle holder – easily produced at home**
Candle diameter: 16 mm - 26 mm

**What you need**
- TPU filament
- Hobby grade pouring concrete
- Water
- Optional: Acrylic colors
- Optional: Vaseline or kitchen oil

**Instructions (also check images)**
1. Print the mold in TPU – I you have not yet printed this material, check YouTube for instructions. It’s quite easy even with a beginner machine like a Ender 3V2
2. Mix the concrete according to the instructions of the manufacturer
3. Optional: Add acrylic colors to the mix
4. Optional: rub the inside of the mold with Vaseline or kitchen oil for easier separation later
5. Pour the mix into the mold
6. Optional: Bumb the filled mold lightly on your table to get rid of air bubbles
7. Wait until the mix dried. Note that the acrylic color might add to the time it takes to fully dry.
8. Remove the cast by inverting the mold and pulling it out
9. Optional: Paint the cake
10. Have fun!

Size of the finished holder: 89 x 89 x 41 mm
Don't forget to post your makes

**Print settings**
Required build volume: 100 x 100 x 60 mm
Material usage: 40g
Print time: 4h

Material: TPU 95 – other shore hardness down to 80 should work, too – but are not tested.
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

Heart Cooke

heart Cooke v2.sat

FHW: Moan Zone island tpu mold

**Hello Tribe**

I was inspired to make a Tpu ,old for ultra cal, please enjoy. this makes an island for 28mm minis.

FHW_ Moan Zone island tpu mold.stl

Donut Mold v1.stl

DIY Concrete Kettlebell Shell

This is a shell for making your own DIY Kettlebell with concrete!  Just print, and fill with cheap concrete and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

scale to 90% or less for Ender3 size printers to print on its back.

Designed to print on its back, with supports under the handle.  Orienting it this way will give more strength to the handle as the plastic will lay horizontally through the handle instead of radially.  That said, it can be printed with the handle at the top, but will still most likely require supports for the handle.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

DIY Concrete Dumbbell Shell 2

This is another shell for making your own DIY Dumbbells with concrete!  And this one holds more concrete!  Just print, and fill with cheap concrete (optionally insert 1/2" rebar through handle for more strength) and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

At 100% scale it just fits an Ender3 style printer, coming in at 242mm.

Designed to print with no supports, on end with the filling hole at the top.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

DIY Concrete Dumbbell Shell

This is a shell for making your own DIY Dumbbells with concrete!  Just print, and fill with cheap concrete (optionally insert 1/2" rebar through handle for more strength) and let it dry and you have a nice, effective dumbbell for WAY less than the store bought ones.  Can be scaled up or down for more/less weight!

At 100% scale it just fits an Ender3 style printer, coming in at 242mm.

Designed to print with no supports, on end with the filling hole at the top.

My Links:
https://linktr.ee/Glytch3d
Patreon Merchant tier available if you would like to sell prints of my designs!

HEXAGONAL VASE + MOLD FOR SILICONE MOLD FOR CEMENT VASE!

MOLD FOR SILICONE MOLD - VASE.stl

Flower Shaped Seed Bomb Mold

Hello! Do you like flowers? Do you like to add a bit of flair to what you make? Well here is a great solution, a seed bomb mold shaped like a generic cartoon flower. Break the petals off for smaller bombs or chuck the whole thing into a barren looking spot to bring some vegetation back to your community!

**How to make a seed bomb using this mold...**
**Ingredients:**
5 cups compost
2-3 cups powdered clay OR clay soil
1-2 cups water
1 cup LOCAL wildflower seeds- do some research to see which wild flowers occur naturally near you.
A small piece of cling film
your freshly printed seed bomb mold
newspaper to cover your working area!

**Steps**
1. mix your seeds, compost, and clay together in a bowl
2. add water a little at a time, mixing together with your hands. If your mixture can be rolled into a ball and keep shape, you have achieved the right consistency! Add extra water or clay to get there if you need.
3. Cover the face of your flower mold with your piece of cling wrap
4. press some of your soil mixture into your mold, making sure to really pack it in there! Remove any excess.
5. flip your mold upside-down onto a piece of newspaper. The plastic cling wrap should make the release nice and easy.
6. Repeat until you have hella seed bombs.
7. carry your seed bombs outside to dry in the sun for as long as possible. I will use the same newspaper that I've placed them on indoors, and hold that paper taut as I carry them outside.

**How do I use my seed bombs once dry?**
Watch your weather forecast carefully and as soon as you hear about the first spring rain, go on a tossing spree! Look for areas that could use a little more nature in your community, such as empty lots, planted medians, etc. Putting them out before the rain will allow them to get properly hydrated to start sprouting.

You can also toss this bomb in a pot with soil and water them and watch your hard work pay off!

Snowball Mold: Chicken

SnowChicken_3MF.3MF

Demolder Tool.stl

This tool was designed out of a need to easy remove stubborn products from a three part mold (two plates with a outside ring) without damaging the product.

To use place tool on table or other sturdy flat surface and then gently put mold on top (remove top plate first is desired). Then gently press down on the outside ring of mold to remove item. 

https://creativecommons.org/licenses/by/4.0/

MOLD

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Lychee fruit shaped pot mold

Valkiria | Cabdle holder

Drop | Cement ashtray

Heart planters | Cement mold

Cube Tomato Mold v.3

Cube Tomato Mold v.2

Concrete candle holder “Gugelhupf”

Heart Cooke

FHW: Moan Zone island tpu mold

View 14 new models

DIY Concrete Kettlebell Shell

DIY Concrete Dumbbell Shell 2

DIY Concrete Dumbbell Shell

View 14 new models

Flower Shaped Seed Bomb Mold

Snowball Mold: Chicken

Demolder Tool.stl