Jet Lamp - Table Lamp Ambient Light

CR96-190-P_240624.stl

Organic Shape Shades

Organic_Shades_Model_1.stl

Otto Lamp

Pilu_Otto-screen.stl

Mounting Nut for Euro Style E27 Lamp Socket

nut.stl

LED Light Bar Mount For Round Rods

I decided I was tired of my CR-10 enclosure being dark all the time, so I rummaged up a 24V LED light bar and designed this mount for it.  

I have two different enclosures, with two different frame diameters, 16mm and 14.75mm.  I have included both versions in STL format and the STEP file for those wishing to modify the design for their own use.

I would suggest two of these mounts for each light bar.  The mounts incorporate a steel clip and fastener that is included with the light bar kit, and each mount uses one additional M3x25 SHCS and M3 nylon-insert locknut.

For a standard installation of one lightbar you would require the following:

Bill of Materials
- 12-24V LED Light Bar and Mounting Hardware (the mount was designed to fit one of the lights in this four pack: https://www.amazon.com/dp/B08T8VG75B or equivalent), Quantity 1
- M3x25 SHCS (McMaster 91292A020 (sold qty 100) or equivalent), Quantity 2
- M3 Nylon-Insert Locknut (McMaster 93625A100 (sold qty 100) or equivalent), Quantity 2
- LED Strip Mount, printed, Quantity 2

Refer to the attached images to determine the assembly methods.

I chose to design this part for resin printing, using a toughened resin.  As I printed these on an mSLA printer, I cannot speak to the veracity of this part for FDM printing.  

If one chose to use an FDM I would suggest orienting the rod axis parallel with the printer Z axis, and print with supports.

Table Lamp F039 by UMINO

F039BASE.stl

Polypanels // Stråla IKEA Light Connector

strala-bigtriangle.stl

tamp bay bolts  flexi.stl

Animal Candle Light / no supports / 3mf included

Bear Telight.stl

Bow Tie

bow-tie-small.stl

Tree Bark Candle Holders

candle-holder-large.stl

Pori-Lamp V1

E14+Base.3mf

Anran C3 Light Filter

AnranC3_filter.stl

Mushroom-Lamp Voronoi

Hi friends, this is my new 3D model, inspired by the nature that I love I created this mushroom-shaped lamp with the Voronoi effect surface. 
Very easy to print even without supports.
I printed it with my Bambulab P1S, with a standard profile.
Hope you like it.
If you like my designs, help me grow and be known on social media by tagging my Instagram and tiktok page in your prints. Thank you

LIGHTING

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Jet Lamp - Table Lamp Ambient Light

Organic Shape Shades

Otto Lamp

Mounting Nut for Euro Style E27 Lamp Socket

LED Light Bar Mount For Round Rods

Table Lamp F039 by UMINO

Polypanels // Stråla IKEA Light Connector

tamp bay bolts flexi.stl

Animal Candle Light / no supports / 3mf included

Bow Tie

Tree Bark Candle Holders

Pori-Lamp V1

Anran C3 Light Filter

Mushroom-Lamp Voronoi

Ceiling lamp

Table Lamp 012 by UMINO

Albatross Light // Dynamic Desk Lighting System

Plume Lamp

Table Lamp F038 by UMINO

Ceiling lamp