I decided I was tired of my CR-10 enclosure being dark all the time, so I rummaged up a 24V LED light bar and designed this mount for it.
I have two different enclosures, with two different frame diameters, 16mm and 14.75mm. I have included both versions in STL format and the STEP file for those wishing to modify the design for their own use.
I would suggest two of these mounts for each light bar. The mounts incorporate a steel clip and fastener that is included with the light bar kit, and each mount uses one additional M3x25 SHCS and M3 nylon-insert locknut.
For a standard installation of one lightbar you would require the following:
Bill of Materials
- 12-24V LED Light Bar and Mounting Hardware (the mount was designed to fit one of the lights in this four pack: https://www.amazon.com/dp/B08T8VG75B or equivalent), Quantity 1
- M3x25 SHCS (McMaster 91292A020 (sold qty 100) or equivalent), Quantity 2
- M3 Nylon-Insert Locknut (McMaster 93625A100 (sold qty 100) or equivalent), Quantity 2
- LED Strip Mount, printed, Quantity 2
Refer to the attached images to determine the assembly methods.
I chose to design this part for resin printing, using a toughened resin. As I printed these on an mSLA printer, I cannot speak to the veracity of this part for FDM printing.
If one chose to use an FDM I would suggest orienting the rod axis parallel with the printer Z axis, and print with supports.