SP00L Lamp

Spool is a 3d printable lamp design that gives new life to filament spools.

Those of us who print know what it's like to have spent spools lying around not knowing what to do with them, plus they are difficult to recycle. That's why I created this design that ingeniously plays with the spools to make the most of them.

If you give a lot of support to the design I will create a line of lamps with the same concept of reusing spools!

To assemble it you only have to print 4 times the same piece (SPOOL.stl), I recommend printing them 2 by 2. The next step would be to glue or solder two pieces so that you have two half-cylinders with the bases at the ends. These halves are attached to two spools, one at the top where the socket with the bulb will be attached, and another at the bottom. Finally, the two halves are tied together with string or you can even use filament scraps.

You can play with the combination of different types and colors of spools that you have: dark or transparent, plastic or cardboard... I used the dark spools from 3DJake and the transparent ones from Sakata 3D.

The outer diameter of the lamp is 22.5 cm, I left a margin so you can assemble it with coils of different brands of 1kg. You can even scale the design so that you can mount a smaller version with smaller spools!

For more clarification you can check my Instagram where I will be posting more information about the project:
https://www.instagram.com/creaserra


3D PRINTING SETTINGS
For the model (SPOOL.stl) it should be printed using transparent PLA (I used from 3DJake) in the optimal orientation (big base down) and using the following parameters:

Infill: 0%
No Support
No adhesion
Layer height: 0.3 mm
Top layers 4
Bottom layers 4
Wall line count: 3
Nozzle size: 0.4 mm
Line width: 0.4 mm
Nozzle temperature: 210ºC
Retraction: Yes

Spool Lamp

Mini Cauldron Tealight Holder / Print in place / 3mf included

MINI CAULDRON TEALIGHT HOLDER.stl

Ribbed Gingerbread Man Decor

Hanging Gingerbreadman decor.stl

Bubble Lamp

Bubble Lamp.stl

Lamp Shade, or Geometric Ball made with patterns

Luminaria.stl

Horloge d'intérieur

Aiguille heure v5.stl

Paper Bag Vase V2

paper bag vase V2.stl

Zephyr TableLamp

Zephyr  LampShade.stl

Mini Lamp 008 by UMINO

M008CAP.stl

Crinkle lamp base for clip-in accessory bulb

Crinkle lamp base.STL

Textured Planters

Pilu_S-POT-TX3_TOP.stl

Cozy Coffee & Tea Knitting Needle Caps (Flexible Fit)

Classic_Mug_Needle_Cap.stl

Low Poly Deer Planter 

Low poly deer wall mlountable.stl

Small Spatula/Scraper/Mixer

I designed this small spatula in order to mix the resin in my printer's resin vat before starting a print.

Simple design with grippy handle and hole for easy hanging storage.

Ring Camera Bird Feeder V2

Tray.stl

Tree trunk planter (Vasemode)

Tree trunk printed using spiral vase mode on prusa slicer.

For cura slicer: Special modes -> Spiralize outer contour

Hole diameter 70mm (2.75")

Height 65mm (2.36")

Model in contest "Vase mode vases" on printables.com:

https://www.printables.com/model/287743-tree-trunk-vase-mode

Home & garden

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

SP00L Lamp

Mini Cauldron Tealight Holder / Print in place / 3mf included

Ribbed Gingerbread Man Decor

Bubble Lamp

Lamp Shade, or Geometric Ball made with patterns

Horloge d'intérieur

Paper Bag Vase V2

Zephyr TableLamp

Mini Lamp 008 by UMINO

Crinkle lamp base for clip-in accessory bulb

Textured Planters

Cozy Coffee & Tea Knitting Needle Caps (Flexible Fit)

Low Poly Deer Planter

Small Spatula/Scraper/Mixer

Ring Camera Bird Feeder V2

Tree trunk planter (Vasemode)

Belt tool holder

Bubble Vase and Bubble Bowl

Hanging Bat Tea Light Holder

SAKUMI | Table Lamp E14 & E26/27