Nursery Pots

nursery Pot 7cm.stl

Twisted Spiral Planter

Twisted Spiral Planter.stl

Solene Table Lamp. Modern and Traditional Design at the same time

nordic_hollow1.stl

Ryobi Multi-Tool (TDW025786) allen wrench holder

If you ask me, every tool that requires a tool to adjust it should have a place on the tool to hold the tool. Some Ryobi tools have this feature, but the Multi-tool (brushed -- the brushless may be different) does not.

Three 6mm x 2mm magnets are needed to hold the allen wrench into this holder. Very likely it will just fall out without them.

You can see from the photo how it is hot-melt-glued to the base of the tool, just above the battery. It's never proven to be in the way, so I'm happy with it.

Ryobi Multi-Tool allen wrench holder

RAMA | magnetic knife rack for kitchen rail

RAMA_magnetic-knife-rack.stl

Groovy Lemon Desk Clock – Retro Citrus, 70s Decor, Playful, Desk, Pop Art, Funky, Dopamine Decor

pixelandpapier__citrus_clock__face_plate.stl

SKELETON HAND TEA LIGHT HOLDER - HAND OF SHADOWS

HAND_WITH_TEALIGHT.stl

Lamp Shade - Raw Filament 

Lamp Shade Raw Filament Rib.3mf

Shiba Planter

ShibaPlanter.3mf

Awareness Ribbon

ribbon.stl

Abstract Vase or Lamp Shade.stl

A simple abstract vase. I eventually turned it into a lamp shape.

Printed standing up with adhesion but without supports.

RattanArchBookends

RattanBookEnd_RATTAN REV 04.stl

Table Lamp

Shade2.stl

Wall Decor Mickey mouse.stl

This is a wall decoration. I created this 3d model with the shapes of minnie and Mickey mouse as a wall decoration. hope you enjoy

Dust Blower Vase mode TPU/Flexible

Shelled dust blower.stl

SP00L Lamp

Spool is a 3d printable lamp design that gives new life to filament spools.

Those of us who print know what it's like to have spent spools lying around not knowing what to do with them, plus they are difficult to recycle. That's why I created this design that ingeniously plays with the spools to make the most of them.

If you give a lot of support to the design I will create a line of lamps with the same concept of reusing spools!

To assemble it you only have to print 4 times the same piece (SPOOL.stl), I recommend printing them 2 by 2. The next step would be to glue or solder two pieces so that you have two half-cylinders with the bases at the ends. These halves are attached to two spools, one at the top where the socket with the bulb will be attached, and another at the bottom. Finally, the two halves are tied together with string or you can even use filament scraps.

You can play with the combination of different types and colors of spools that you have: dark or transparent, plastic or cardboard... I used the dark spools from 3DJake and the transparent ones from Sakata 3D.

The outer diameter of the lamp is 22.5 cm, I left a margin so you can assemble it with coils of different brands of 1kg. You can even scale the design so that you can mount a smaller version with smaller spools!

For more clarification you can check my Instagram where I will be posting more information about the project:
https://www.instagram.com/creaserra


3D PRINTING SETTINGS
For the model (SPOOL.stl) it should be printed using transparent PLA (I used from 3DJake) in the optimal orientation (big base down) and using the following parameters:

Infill: 0%
No Support
No adhesion
Layer height: 0.3 mm
Top layers 4
Bottom layers 4
Wall line count: 3
Nozzle size: 0.4 mm
Line width: 0.4 mm
Nozzle temperature: 210ºC
Retraction: Yes

Home & Garden

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Nursery Pots

Twisted Spiral Planter

Solene Table Lamp. Modern and Traditional Design at the same time

Ryobi Multi-Tool (TDW025786) allen wrench holder

RAMA | magnetic knife rack for kitchen rail

Groovy Lemon Desk Clock – Retro Citrus, 70s Decor, Playful, Desk, Pop Art, Funky, Dopamine Decor

SKELETON HAND TEA LIGHT HOLDER - HAND OF SHADOWS

Lamp Shade - Raw Filament

Shiba Planter

Awareness Ribbon

Abstract Vase or Lamp Shade.stl

RattanArchBookends

Table Lamp

Wall Decor Mickey mouse.stl

Dust Blower Vase mode TPU/Flexible

SP00L Lamp

Volley Ball CVontainer

Mini square wood work

Mini Cauldron Tealight Holder / Print in place / 3mf included

Low Poly Reeper