Pokémon Card Box - Snap Fit Box

Print-in-place snap fit box made to fit Pokémon cards!

1 Piece design
Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Snap Fit Box Blank 50x100x50mm

Print-in-place snap fit box
50x100x50mm(outer measurement)
Feel free to remix this blank box!

Prints great at 0.16mm layer height
No supports required

Do you want to kickstart your very own 3D printing business? Become a Member on my Thangs page to receive the right to sell any of my 3D printed models in your own store!

Gridfinity Mitsubishi Uni Lead Pack Holder

This is a Gridfinity 1x4 holder for Mitsubishi Uni drop pencil lead packs. The fitment is quite tight to allow for magnetic mounting to an angled surface like a drafting table.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax 

Gridfinity Mitsubishi Uni Drop Pencil Holder

This is a Gridfinity 1x4 that can hold 4 Mitsubishi Uni drop pencils. It also has a small slot above the pencils that will tightly grasp Hi-Polymer erasers.

https://doslabelectronics.com/
https://ko-fi.com/mrcbax

MUNBYN LABEL HOLDER V2

As with all of my projects, I wasn't completely happy with the other solutions. When I started this project I knew I wanted to make it easier and quicker to print. This was designed to be used with Munbyn printer labels but should also work with other brands. In this version, I have reworked the sides and added a tray up top to save space on your desk.

**NEEDED HARDWARE**
4 - M4-0.7 x12mm Flat Head Screws

**3D PRINTING SETTINGS**
Layer Height - 0.2mm - 0.3mm
Material - PLA, PETG, ASA, ABS

Roller should be the only part that needs supports. The other parts make sure they lay flat.

Lower Tray.stl

Spray Bottle Hangar 

This is a Spray bottle hangar I designed around a basic idea with a strict guideline. 
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
 

** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has reduced file size from  9.64Mb to 1.06Mb. Changed Mouse ear generation from eye balled placement to a grid deploy and changed the 2 sides from separate sketches to a mirrored sketch increasing the symmetry by 0.05mm. 
Again any issues or notes please comment, Makes are always appreciated. 

pwhead holder-tpu2.stl

Power washer tip holder.  Print with TPU and high infill.  You want it to be stiff so the tips will be held in place.  There is a rim that fits into the groove in the power washer tip.

EZPZ Pegboard Hook // 5mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 5mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Coin Tube

Penny Tube.stl

Stacked Vase

This cool vase is named after its alternating smooth and angled vertical patterns that are seemingly stacked one after another.

Print Settings:
No support
Enable Vase Mode (Spiralized Contour or the equivalent for your slicer)
.1 - .2mm layer height

Playing Card Holder with Magnetic Closure

CardHolderBottom.stl

Blank pumkin tealight holder

blank pumpkin.stl

Skull SD Holder

skull sd card holder

no supports required

SUNLU FilaDryer S1 holder for Ender 3

I designed this quite a while ago when I got a FilaDrier to keep fiberglass nylon filament printable. 
I made it so I could keep the drier and printer together, essentially replacing the included spool holder.
I made this for my Ender 3 Pro, but it should fit on any 20mm aluminium extrusion.

Generic LED Desk Lamp Remote Holder

Remote Holder V1_2.step

Zørp-O'-Lantern Bust Stand

Here's a nice stand for your [Zørp-O'-Lantern head](https://than.gs/m/939862) ([alt](https://than.gs/m/941237))! The neck is angled so you can make the head tilt in different directions based on how to orient it.

Swap filament at 2mm to distinguish the base from the neck. You can glue the head in place or just leave it loose on the stand.

Photographed model was printed at 180% scale using [Polymaker PolyTerra Matte PLA](https://amzn.to/3PHOxFA) ([US direct](https://bit.ly/polyTerra))

Holder

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Pokémon Card Box - Snap Fit Box

Snap Fit Box Blank 50x100x50mm

Gridfinity Mitsubishi Uni Lead Pack Holder

Gridfinity Mitsubishi Uni Drop Pencil Holder

MUNBYN LABEL HOLDER V2

Spray Bottle Hangar

pwhead holder-tpu2.stl

View 17 new models

Coin Tube

Stacked Vase

Playing Card Holder with Magnetic Closure

Blank pumkin tealight holder

View 13 new models

SUNLU FilaDryer S1 holder for Ender 3

Generic LED Desk Lamp Remote Holder

Zørp-O'-Lantern Bust Stand

Candle stick holder

Skull Mug Holder - Decoration

Drinkware Lid Rack Organizer Bundle – Fits YETI lids

Telstra TV (Roku 4200TL) TV Hanger