Crocodile | Car-Phone Holder

COCODRILO.stl

Golf Ball Display Stand Holder

This is a compact minimal golf ball holder for displaying your favourite golf balls.

Diameter: 28mm 
Height: 6.4mm

IncenseHolderv1.stl

Keeping with my wiggle theme, I created an incense holder

Alien Pod Shot Glass Holder

This Alien Pod Shot Glass Holder uses a Twisted Shotz, 30ml shot glass and, as it turns out, allows for just over an inch of space at the bottom of the glass without affecting the way the glass fits into the holder, so you can have crushed ice under your shot glass when it's inside this holder. I may still design an Alien tray for more than one of these, but technically, it isn't necessary. The Alien Pod is  a remix and was originally from the following source:
https://www.thingiverse.com/thing:4423636. It was designed to hold pencils. I think it works for shots and pencils myself.

Gridfinity SD Card Holder, 18 slot, 3x1

**18 capacity, 3x1 Gridfinity, SD card holder. **

Didn't like the tight spacings and stair-stepped designs I found before, so I made my own. 
All slots are uniform height, alternated for ease of access and intended to be just wide enough to read labels if you're like me and have tons of project cards that need to be identified quickly.

Intended to be used in a 3x1 3D printer sidecar holder. I've included a modified version of Voidstar Lab's Anycubic Chiron sidecar that fits this.

Gridfinity Bulk SD Holder.stl

Candy Corn Coaster

Display Only Candy Corn Coaster.stl

GreenScapes Succulent Planter

Y-axis motor mount

On my Voxelab Aquila X2, the y-axis mount melted, because most likely I set the wrong current to the motor. The shape of the carriage had to be changed, slightly to make it necessary to use less support. The holes are not symmetrically located, just like on the original part. That's how it should be. I printed in the position shown in the last photo. 

The carriage is made of sixth grade nylon with 30 percent glass filling.

I recommend printing with 35% triangle infill and 3 perimeters. Layer height 0.2 mm

USB type C Holder Collection

usb c 5.step

SD and micro SD card holder collection

sd card and micro holder 10

1/4 Quater inch jack holder collection

Holder for 10 1/4" headphone jack accessories.

1/4 Quater inch jack holder 10

3.5mm headphone jack holder collection 

holder to organise up to 10 headphone jack accessories

3.5mm headphone jack x 10 holder

Pen Holder (Creality Cloud Tool)


This was a quick test of the built-in maker tool and Slicer for this simple (not so simple) pen holder. start to finish was to try out the capacity of the maker tool on the phone, which worked a treat, and while fast, responsive, and easy to use allowed me to make something to a reasonably high standard. The built in Slicer on the mobile app worked the same as my PC with the default settings on a K1 it printed in 2h 50m with a filament change a few layers in when I ran out of white. There was some minor wisping of the new filament but completely untouched non Creality filament printed very well. There is some ghosting in this part due to the speed of the k1 and some known of firmware bugs, but for literally plug and play from a mobile you couldn't ask for much easier or better of a result in my opinion. This is well worth a print imo and is something I'm sure I'll make more of in future.
Originally hosted at https://www.crealitycloud.com/model-detail/652e5a6206d6cf3ae6afd1b0
all properties used are and remain property of Creality.


Dastardly Dovetail Box (Round Magnetic)

DDround_Bottom_Magnetic.stl

Headphone Hook holder hanger wall mount

A compact headphone hanger with a 3.5mm screw hole

Headphone Hook

Screwdriver Holder with spot for Stanley Knife

Screwdriver Holder 1_1.stl

ParkTool AWS-10 belt holder LONG VERSION

Keep your tools close at hand with this belt clip/holder For Park Tools AWSS-10 hex wrench set - also knowns as the best hex wrench set known to man.

Simply slide it onto your belt, pocket or other piece of clothing, slide the tool down and it's alwayss close without taking up space in your pocket or you putting grease in them.

To release the tool simply slide it upwards or to either side. Secure enough for running and jumping in the workshop - perfect for the stressful life of a home or workshop bike mechanic.

This version works great for pockets or other fabric lower than your waist, will make a longer version so you don't have to lift your shirt as often.

This version is longer and therefor interferes less with your shirt when worn on your belt

See orignal/shorter model at:  https://thangs.com/designer/Flaska/3d-model/Park%20Tool%20AWS-10%20belt%20clip%2Fholder-932562?manualModelView=true&source=mymodels

Holder

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Crocodile | Car-Phone Holder

Golf Ball Display Stand Holder

IncenseHolderv1.stl

View 37 new models

Gridfinity SD Card Holder, 18 slot, 3x1

Candy Corn Coaster

GreenScapes Succulent Planter

Y-axis motor mount

USB type C Holder Collection

SD and micro SD card holder collection

1/4 Quater inch jack holder collection

3.5mm headphone jack holder collection

Pen Holder (Creality Cloud Tool)

Dastardly Dovetail Box (Round Magnetic)

View 24 new models

Screwdriver Holder with spot for Stanley Knife

ParkTool AWS-10 belt holder LONG VERSION

Zombie Trinkets Holder

Pen/Pencil Holder

Rubber Duck Clip