Flexi Crochet Snowman

Suspended Haunter

SuspendedHaunter.stl

Snow Mouse Soap Holder

snow mouse body.stl

Taffy Box - Small

Small Taffy Box Base.stl

Travel Soap Case (Three Sizes)

Travel Soap Case Base Large.STEP

Ghost Trap Christmas Ornament

GhosttrapOrnament.3mf

Snowflake Ornament

snowflake with hole 2025 v2.3mf

Not So... XL Elf,

Not so.. XL Elf.3mf

'Mysterious Howl' Mask - "Arcane" (Sculptober Day3)

MysteriousHowlMask.stl

Goldee The Baby Dragon

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
**Patreon Sculpt, now FREE for you!**
_Sculpt by @ChelsC423_

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

Minimalist Heart - Valentine's Day Decor

heart-base.stl

Kaleidoscope Christmas Ball 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled it to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.

HOLIDAY

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Flexi Crochet Snowman

Suspended Haunter

Snow Mouse Soap Holder

Taffy Box - Small

Travel Soap Case (Three Sizes)

Ghost Trap Christmas Ornament

Snowflake Ornament

Not So... XL Elf,

'Mysterious Howl' Mask - "Arcane" (Sculptober Day3)

Goldee The Baby Dragon

Minimalist Heart - Valentine's Day Decor

Kaleidoscope Christmas Ball 2

Print-in-place Trains: Holiday Package

Snowflake Candle Holder

Christmas Cookie Cutters

Snowflake Ornaments - Christmas Day 2

Diamond Kaleidoscope Easter Egg

Snowdragon 2025

Potion bottle - Elegant - Print in place

Gift Box #12