Hoop The Goose Game - Nomz

Hoop The Goose Game 3mf (Ams)- Nomz.3mf

Shrubbery Bowl (small)

A set of bowls inspired by, yes, shrubbery.

See here for video: https://youtu.be/txkC91Bbi84 

The measurement in the file name indicates the approximate diameter of the top of the bowl.

See here for other bowls in the set:
Small (50mm):
Medium (100mm):
Large (150mm):


Book Container

pages.stl

Articulated Bone Tail

Bone Tail (LONG).stl

Spooky Skull Halloween decor

Skull remapped.stl

Gengar first.stl

Gengar is not so cute but is perfect for halloween!
I am working on a project that should be ready tomorrow and it should be good! as soon as i get access to my 3d printers again i will be printing this off and the project before halloween!!

This is really cute halloween decoration 

Dragon Lamp

12-5.stl

Swoop 3 Christmas Stretch Ornament 2024

Stretch Swoop Ornament 3 Whole.stl

Faceted vase #functionalart

This intricately designed 3D model is a faceted vase featuring an impressive geometric design structure. With its sleek angles, polygonal makeup, and modern aesthetic, this model gives off an aura of contemporary elegance and uniqueness. #functionalart

Mira's Glaive - K-Pop Demon Hunters Cosplay Prop Kit | No Supports, No AMS, No Glue

Pastel Periwinkle.stl

Angel Tea Light - Christmas

AngelTeaLight+.stl

Melting Skull Tea light Holder

Large Melting skull.stl

Santa Octopus 

Santa octapus main.stl

Dual Horizontal 7x7 Photo Frame With Keyhole

Are you looking for a 3D printable photo frame to display two of your memorable photos of family, friends, pets, or anything else? Then you will love the Dual Horizontal 7x7 Photo Frame with Keyhole, a 3D printable model that combines classic style and modern functionality. This photo frame has a elegant design with moldings in the front and a keyhole in the back. It can be mounted on the wall with a screw or double sided tape, depending on your preference. It also comes with two rear covers and eight locks, with two versions, one that can be plugged in and other that can be used with M1 screws.

The Dual Horizontal 7x7 Photo Frame with Keyhole is a 3D printable model that you can download and print with any 3D printer and filament. It is easy to print and use, and you can print it in any color you like. It is designed to fit 7x7 cm (2.75x2.75 inches) photos, one next to the other. You can also print multiple frames and create a beautiful wall composition with your photos.

Download the Dual Horizontal 7x7 Photo Frame with Keyhole today and enjoy this simple and elegant photo frame in your home!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Retro Vase Decanter Style

Retro Vase Decanter Style evokes a mid-century modern vintage vibe aesthetic. This model is a _Vase-Mode only _print.  You can filament swap the textured area to create the effect in the images, you will need to manually enter the swaps depending on your scale and layer height. Teal & Copper is %50 scale. Burnt Titanium & Cyan Silk is %25 scale.

**Settings for 0.4 nozzle:**
_Vase-Mode only print - 1 perimeter no top._
**Layer Height:** 0.1mm
**Bottom Layers:** 8
**Extrusion width:** Default 0.6mm on all settings
**Perimeters Overlap:** 50%

**Settings for 0.8 nozzle:**
_Vase-Mode only print - 1 perimeter no top._
**Layer Height:** 0.2mm
**Bottom Layers:** 8
**Extrusion width:** Default 1.2 mm on all settings
**Perimeters Overlap:** 50%

Creative Commons License 4.0 BY-NC-ND

grinch duck

grinch duck.3mf

Pumpkin_Flat_Bottom_Colored.3mf

A pumpkin model made for 3D printing!
The Multi-Part model is available on my page to easily add color without a multi-material 3D printer!

STL Files + Commercial License available on Patreon https://www.patreon.com/PrintStart3D

2-3 walls
Print at 0.16mm layer height with no supports.

Evil Pumpkin Table Lamp - Halloween Lamps - Lamps & Lighting by Lunfardo

EVIL_PUMPKIN_SIZE2.obj

Demented Pumpkin 

Demented pumpkin 2.stl

Double Diamond Christmas Ball

###About the Design
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

###Not To Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

###Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

###Print Time
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

DECORATION

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hoop The Goose Game - Nomz

Shrubbery Bowl (small)

Book Container

Articulated Bone Tail

Spooky Skull Halloween decor

Gengar first.stl

Dragon Lamp

Swoop 3 Christmas Stretch Ornament 2024

Faceted vase #functionalart

Mira's Glaive - K-Pop Demon Hunters Cosplay Prop Kit | No Supports, No AMS, No Glue

Angel Tea Light - Christmas

Melting Skull Tea light Holder

Santa Octopus

Dual Horizontal 7x7 Photo Frame With Keyhole

Retro Vase Decanter Style

grinch duck

Pumpkin_Flat_Bottom_Colored.3mf

Evil Pumpkin Table Lamp - Halloween Lamps - Lamps & Lighting by Lunfardo

Demented Pumpkin

Double Diamond Christmas Ball