Gridfinity Craftsman Wrench Holder 2x2.stl

This holds my 7 wrench set from craftsman. I printed two of these for my metric/UAE wrenches. the largest metric it holds is 18mm. the height of the holder is 42mm as I've got a shallow drawer these are in. 

Gridfinity_Craftsman_Wrench_Holder_2x2.stl

Gridfinity Drill Caddy

Gridfinity 13pc Drill Caddy

Ryobi 6 Gallon Shop Vac to 5 inch One+ Random Orbit Sander Adapter

Gridfinity fits Wiha 7pc Micro Screwdriver Set

Airtag Chuck for Drill

revised airtag chuck.stl

Allen Wrench set gridfinity Allan

A space for your allen wrenches in the gridfinity setup. 2 blocks. Thanks, Zack!

#Gridfinity Workbench Dremel Bit storage Remix

This is my take on Zack's Cthulhu-sized dremel bit storage model. For those that can't find it, Zacks model got taken down (I think he had to get dat $ from thangs) so Rogarat added the original model to their remix files here https://www.thingiverse.com/thing:4623056/files. I will include it here as well. Tesser-Wolf has a smaller (more sane) remix of Zack's model here https://www.thingiverse.com/thing:5269037. I remixed the latter to fit into the gridfinity system as well as to mount a stand for my flex shaft motor, and a spot for a chuck key. I'll likely add a gridfinity remix of Zack's original model in the future, but for now, this model hold about 3/4 and will likely suit the average dremel wielding debonair. 

It's printing now, Ill post photos when it's finished.

Gridfinity Workbench Dremel Bit storage Remix

Gridfinity Jig Saw Blade Caddy

Bosch GBS-75 Belt Sander Handheld.stl

This is the front holder for Bosch Sander GBS_75.
Minys gone so a made this model to replace the original part.
Fit's perfectly.
Printed in ABS.

Bosch GBS-75 Handheld.stl

gridfinity dremel bit 3x2

gridifinty compatible sort for standard dremel bits

Pliers Rack for Skadis

Adapted this [Plier rack by prozach - https://www.thingiverse.com/thing:3776187](https://www.thingiverse.com/thing:3776187)  to fit the IKEA Skadis pegboard system.

Supports will be required for the upper pegs, you should be able to set enforcers such that the supports do not touch the bottom pegs and are very easy to remove (see screenshot)

This should fit tightly into the rack without any post processing as long as you are cautious while installing it - ensure it is fully slid down on the top pegs before pushing the bottom pegs in. My initial print fit and i've increased tolerances slightly from that but worst case you might need to sand down the bottom pegs a little bit.


Gridfinity Stepped Drill Bit Caddy

Gridfinity 64mm Hole Saw Caddy.step

64mm Hole Saw Caddy.step

Gridfinity 76mm Hole Saw Caddy.step

Hole Saw Caddy for stacked saws sized 76, 64, 57, 51, 44, 38, 35, 32, 25, 22, 19.
The caddy is sized to be stackable.

Ridgid Shopvac Filter Nut

Ridgid Shopvac Filter Nut. Used to hold the air filter in place. Fits a 7/16" x 14 Thread. Model based on the original design.

Gridfinity Nippers + Strippers + Pliers Racks

Nipper Holder x6.stl

Gridfinity Baseplates

Weighted Baseplate 3x2.stl

Wrench Hooks

Ryobi Drill Spirit Level Adapter

Adapter attaches at the bottom of your Ryobi drill and gives you three spirit level indicators for straight drilling. You need to glue the spirit levels onto the adapter.

Construction & Power Tools

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity Craftsman Wrench Holder 2x2.stl

Gridfinity Drill Caddy

Gridfinity 13pc Drill Caddy

View 16 new models

Gridfinity fits Wiha 7pc Micro Screwdriver Set

Airtag Chuck for Drill

Allen Wrench set gridfinity Allan

#Gridfinity Workbench Dremel Bit storage Remix

Gridfinity Jig Saw Blade Caddy

Bosch GBS-75 Belt Sander Handheld.stl

gridfinity dremel bit 3x2

Pliers Rack for Skadis

Gridfinity Stepped Drill Bit Caddy

Gridfinity 64mm Hole Saw Caddy.step

Gridfinity 76mm Hole Saw Caddy.step

Ridgid Shopvac Filter Nut

Gridfinity Nippers + Strippers + Pliers Racks

View 10 new models

Wrench Hooks

Ryobi Drill Spirit Level Adapter