Desk Clamp Headphone Holder

Holder.STL

speaker_deflector

Most flat panel TVs have the speakers on the bottom and the sound is directed downwards then in all directions. This deflector directs the sound towards the viewer increasing clarity. People like me that wear hearing aids this really helps. Prints with no supports and can be mounted to the TV using foam double sided tape.


OPTOMA UHD50 Projector Ceiling Mount

Projector_Mount.stl

Gridfinity Headphone holder

Tested with Beyerdynamics DT770 Pro. should fit most over- and on-ear heaphones.
Best printed with 2 walls and lightning infill.

roll filament carrier for 1kg rol.obj

roll filament carrier for 1kg rol  for 3d printing filament holder that goes in to the body you must print 1 pieces. you will all so needing 2 bearings 25mm inner hole and 50mm outer dia.

Meshify 2 Compact Resivoir Pump Combo Mount and Passthrough

SSD Sled to EK XRES 140 Revo Mount - Left (meshed)

RC Helicopter wing holder thang

No sure the name of the part or the model of the RC Helicopter. Screw holes to fix to the shaft must be drilled after, since I was not able to make it print nicelly.

Simple Spool Holder

This is a simple spool holder for the Flashforge Adventurer 3. It is a great addition for using 1kg filament spools. I work really hard to post designs every day, so if you like my designs, a follow and some feedback would be very helpful.

You can also find me at:
Thangs: https://thangs.com/designer/Ponder
Cults: https://cults3d.com/en/users/PonderStudio
Thingiverse:
https://www.thingiverse.com/ponderstudio/designs

Acer P5630 tripod adapter

AcerP5630.STL

TPLINK or NETGEAR 8 port switch mount

This part is designed specifically for my custom homelab mini rack made from 2020 extrusions: [Build Log](https://masoncomputers.com/projects/mini-homelab-rack/)

This has been tested to fit a NETGEAR GS305P and TP-LINK TL-SG108

A PS1, one of my favourite games consoles

DIY Geiger Counter

Splash Guard for slobbering Pets

minimal keyboard 68

Keyboard_all.stl

Wall Mounted Cell Phone or Tablet Shelf

Wall mounted cell phone or tablet shelf. Works for iPhone and Android, will also hold tablets like iPad, Amazon or Samsung (maybe more, let us know what you used it for). Useful for home gyms, kitchens or anywhere you want to set your screen down and watch YouTube, Twitch or whatever.

_Have a suggestion on how to make this design even better? - Feel free to leave a comment. We will have a read through and see if we can incorporate your idea into the design. If we can we’ll update with a new version._

**Recommended Setting**
Printer Brand: FlashForge
Printer Model: Adventure 4
Print Software: Flash Print
Nozzle Size: 0.4mm
Material: PLA 1.75mm
Extruder Temperature: 205℃
Platform Temperature: 55℃
Layer Height: 0.08mm
First Layer Height: 0.20mm
Base Print Speed: 80mm/s
Shell Count: 2
Shell Print Order: from inner to outer
Infill Top Solid Layers: 12
Infill Bottom Solid Layers: 12
Fill Density: 15-20%
Fill Pattern: Hexagon
Supports: NONE
Raft: NONE

_Have suggestions on how to print this design even better? - Feel free to leave us comment. We will test on the latest version of this design and if it prints the same or better we’ll update this section._

**Post Printing**
Light sanding recommended.


**Additional Materials**
Standard drywall screws. 
Drywall anchors recommended.

**Likes & Tipping**
Your likes and tips help us out so much. No obligations for either of course. Thank you so much for those that support our designs!


M2 T-Nut - use for Voron 0.1 Makerbeam XL 1515 Extrusion

M2 T-Nuts for Voron 0.1 Makerbeam XL 1515 extrusion. Use with M2 self tapping screws or bolts.
M2 T-Nuts are great for attaching components to Voron 0 3D printers, to 1515 aluminium extrusion or even attach the Voron 0 case using the T-Nuts. You can use these 'post build' when you can't slide any M3 nuts into the extrusion slots because the ends are blocked off.

The extrusion gap is 3.3mm so the T-Nuts have only a small amount of plastic to encase the M2 thread, so worth watching the video to print them correctly.

See video for tips on how to make & use 
https://youtu.be/b-SEgJt-8dc

T-Nuts for 1515 extrusion are hard to come by so these plastic versions are a good solution. They're not designed for heavy loads but are good for extra add ons.

They're great for attaching Voron 0 case panels!  No fiddling with M3 nuts and positioning them in the right place.

**How to Print**
Prusa Slicer - Printer setting "Perimeter Generation" should be Classic not Arachne  so the perimeter lines are continous and stronger at the sides of the print.  Arachne seems to break up the lines which weakens the print.  Check the above YouTube video for details.

- 0.4 nozzle
- 0.2mm layer height
- Print in ABS if installing in a hot enclosure.

**How to use**
- Put screw in the correct side which is the side with the round collar.
- The screw length should be the thickness of the object plus 3-4mm.  For example, 8mm M2 screw requires 4mm thickness for the object being attached and 4mm into the slot.


M2 T-Nuts - use for Voron 0.1 Makerbeam XL 1515 Extrusion

3d printer spring stand

spring_stand_0.stl

Call Of Duty : Modern Warfare II Phone Stand

main base.stl

 Smartphone Camera Secrecy

FechaCameraCorpo.stl

Altoids tin micro sd card holder

simple design that clips under the lip of a Altoids can. Gives you spots for 30 micro SD cards and tons of extra space for everyday life.

Computers & Electronics

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Desk Clamp Headphone Holder

speaker_deflector

OPTOMA UHD50 Projector Ceiling Mount

View 12 new models

View 26 new models

Meshify 2 Compact Resivoir Pump Combo Mount and Passthrough

RC Helicopter wing holder thang

Simple Spool Holder

Acer P5630 tripod adapter

TPLINK or NETGEAR 8 port switch mount

PS1

DIY Geiger Counter

Splash Guard for slobbering Pets

minimal keyboard 68

Wall Mounted Cell Phone or Tablet Shelf

M2 T-Nut - use for Voron 0.1 Makerbeam XL 1515 Extrusion

3d printer spring stand

Call Of Duty : Modern Warfare II Phone Stand

View 24 new models

Altoids tin micro sd card holder