Hooks to hang things on your wall.  

Blank hooks can be stuck to a wall with double-sided tape or command strips. Print at anywhere from 10-20% infill, no supports or rafts.  Can be used for light hanging applications like rags or towels. 

Hooks with bolt holes can be fixed to walls via a 1/4" (#14) wood screw.  In my case, I used plastic drywall anchors for support as well. The lower hole fits a #6 wood screw and keeps the hook from rotating.  Print at 20% infill or above for best results, no supports or rafts. The weight limit is whatever your screw+anchor can support. I've hung backpacks up to 25lbs with good results. 

Simple Wall Hooks

Hanger_Simplified.STL

This case holds a sports mouthguard.  Connects with no tools or additional hardware.  The clips that lock the two halves together when closed are admittedly very fragile.  

Printed with supports for hinges and no rafts. 

Mouthguard Case

Bottom.STL

This design takes the existing dimmer holder for the [Gulfcoast Robotics Light Bar Dimmer](https://gulfcoast-robotics.com/pages/led-light-dimmer-switch-bracket-stl) and adds the ability to attach it to the extruded crossbeam of the Ender 3.  The square end of the connector is press-fit to the square opening in the holder, although adhesive/PLA welds between the two parts might add support.  

Both parts print without rafts or supports. 

Gulfcoast Robotics Dimmer Switch Holder

Holder.STL

This kitchen scale holder is designed to loosely fit the Nourish brand kitchen scale and can be adhered to the underside of a cabinet set.  The standoff on top fits the slot flush with a one-inch overhang, and the scale protrudes from the slot for easy access. This is a rough model and can likely be redimensioned to fit other kitchen scale brands as well. 

Prints with no supports or rafts. 

Kitchen Scale Overhang Slot

This headphone holder is designed to clamp onto the side of your desk.  The included model has a two-inch jaw and can clamp around a one-square-inch overhang. 

Print the holder on its side and the screw on its flat end.  No supports or rafts required. 

Desk Clamp Headphone Holder

These lids are designed to snap onto the top of Goya branded cans (possibly other brands as well) for reuse or storage.  

Prints face down with no supports or rafts. 

Goya Can Lids

MediumLid.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

kevnought

Achievements

Explorer

Seedling