Diamond Christmas Bell

This is the third in this year's Christmas bell series. It prints quickly ad easily. Use a nice medium toned silky, metallic or multicolored filament to show off the geometry - or use translucent filament to make it glow.

This is based on my closed lattice, spiral and open lattice bells. It's roughly the same size (slightly taller) with a new loop at the top and a new lattice pattern. 

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**PRINT SETTINGS**
* Walls: 0.4 - 0.8 mm (I used 0.4 mm for the clear bell and added an alternating extra line for the opaque bell)
* Layer Thickness: 0.15 mm recommended. Anything from 0.1 - 0.2 mm should look good.
* Infill: None. Seriously. It doesn't need it. It just adds weight and print time.
* Rafts/Brim: I didn't use either. However, the first layer is just a single width circle, so you may need to add a brim or raft.
* Supports: None. I designed this to print cleanly without them.

Spiral Christmas Bulb 2024

Bulb Spiral.stl

Spiral Ribbon Christmas Bulb 2024

Bulb Spiral Ribbon v2.stl

Cathedral Christmas Tree Topper 2024

Topper Cathedral Whole.stl

Wicker Ornament Container

Display only do not print.stl

Spiral Christmas Finial 2024

Finial Spiral Whole.stl

Mr Nice Guy Christmas Ball / Multiparts / No Supports

Middle Finger.stl

Spiral and Fine Lattice Balls with Stems

Spiral Ball 2022.stl

Shelf Grinch  

Shelf Grinch body without front fluff.stl

XL Santa 

Xl santa.3mf

10mm Socket Christmas Tree Ornament! - Mechanics Celebrate too!

10mm_w_Wrench_V1.stl

Stormtrooper Christmas Tree Decoration

This is an Stormtrooper Helmet Christmas Tree Decoration.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

PKE Meter Christmas Ornament

PKE Meter Ornamnet .3mf

Heart Snowflake Ornament

HeartSnowflake.stl

Knitted Deer Head Christmas Ornament / 3MF Included / Prints By Parts / No Supports 

Deer Head With Hoop (Multicolor).stl

Christmas Ball - Alternating Diamonds

Alternating Diamond Stacks 4b Simplified Repaired.stl

Santa Ornament/Decoration - Support Free

Santa Decoration.stl

Daffy Duck Christmas Figurine – Holiday Collectible

Даффи1.stl

Closed Spiral Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I printed at 200 C with 115% flow.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm. 

*Infill*
This does not need any infill. JUST DON'T DO IT – especialy if you print it with transparent filament.

*Speed*
* Outer Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
I first printed with used normal supports and an overhang angle of 67 degrees and no other supports. It worked until 2 minutes from completion, when the model came loose from the bed. When I tried again, I with an overhang angle of 64 degrees and added 8 custom supports that keep the model from wobbling. I've included a screenshot from Cura of the supports. 

I added a support blocker in the loop to keep from having supports added inside the loop.

Shelf Santa 

Shelf Santa.stl

Christmas ornament

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Diamond Christmas Bell

Spiral Christmas Bulb 2024

Spiral Ribbon Christmas Bulb 2024

Cathedral Christmas Tree Topper 2024

Wicker Ornament Container

Spiral Christmas Finial 2024

Mr Nice Guy Christmas Ball / Multiparts / No Supports

Spiral and Fine Lattice Balls with Stems

Shelf Grinch

XL Santa

10mm Socket Christmas Tree Ornament! - Mechanics Celebrate too!

Stormtrooper Christmas Tree Decoration

PKE Meter Christmas Ornament

Heart Snowflake Ornament

Knitted Deer Head Christmas Ornament / 3MF Included / Prints By Parts / No Supports

Christmas Ball - Alternating Diamonds

Santa Ornament/Decoration - Support Free

Daffy Duck Christmas Figurine – Holiday Collectible

Closed Spiral Christmas Ornament

Shelf Santa