Mr Dog Chritsmas Tree Ornament 

MrDog.stl

Christmas Kitty Ornament

Christmas Kitty v2.stl

Giant Snowman - Valentine's Day Edition

Demo.stl

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

Kaleidoscope Christmas Ball 1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled a similar design to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.


Knitted Pickle Ornaments Bundle / Multiparts / No Supports

One Piece - Pickle Smiley.stl

Stacked Diamond Christmas Ball

Quad Stacked Diamonds Trio Large Patched v3.stl

Double Spiral Christmas Bulb 2024

double spiral bulb v3.stl

Lantern Christmas Bulb 2024

Lantern Bulb.stl

Elf Egg

Elf Egg hat top 30.stl

Double Lattice Christmas Bulb 2024

Bulb Double Lattice v2.stl

Rubber Duck The Grinch Bundle / No Suppports

Rubber Duck Grinch Santa Hat Middle Finger.stl

Illusion Cube Ornament Edition || Christmas

Illusion Cube Ornament Edition V1.1.3mf

Grumpy Tree Christmas Ornament

Grumpy Tree Ornament.3mf

Open Lattice Flare Christmas Bulb 2024

Open Lattice Flare Bulb.stl

Diamond Christmas Bulb 2024

Swoop Bulb 7 Ornament Simplified.stl

Diamond Christmas Bulb 2 (2024)

Bulb Diamond 2.stl

Light Up House For Tealights and Fairy Lights Multiparts

House One Piece.stl

Flexi Snowflake – A Playful Winter Ornament

snowflake profile.3mf

Spiral Christmas Tree Topper 2024

Spiral Toper - Whole.stl

Christmas Ornament

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mr Dog Chritsmas Tree Ornament

Christmas Kitty Ornament

Giant Snowman - Valentine's Day Edition

Yeah, Another christmas Ball

Kaleidoscope Christmas Ball 1

Knitted Pickle Ornaments Bundle / Multiparts / No Supports

Stacked Diamond Christmas Ball

Double Spiral Christmas Bulb 2024

Lantern Christmas Bulb 2024

Elf Egg

Double Lattice Christmas Bulb 2024

Rubber Duck The Grinch Bundle / No Suppports

Illusion Cube Ornament Edition || Christmas

Grumpy Tree Christmas Ornament

Open Lattice Flare Christmas Bulb 2024

Diamond Christmas Bulb 2024

Diamond Christmas Bulb 2 (2024)

Light Up House For Tealights and Fairy Lights Multiparts

Flexi Snowflake – A Playful Winter Ornament

Spiral Christmas Tree Topper 2024