teacup bracket

teacup shelf final.3mf

NEMA 17 Bracket

Has two holes for m5 screws that can be used to attach the bracket to V-Slot bar, using T nuts.

2-Way Parametric Shelf Bracket

This is a Parametric Shelf Bracket that can be used in either a classic underneath the shelf style or as an over the shelf hanging down style bracket (see pics). The parameters that can be accessed in Fusion 360 are:

Board Thickness: How thick is the board you plan to put in the slot for use in the 'over' style. A lumber yard 1x6 will measure approximately 18.5mm by 140mm due to sanding and facing losses. Enter 19mm in this case for a snug fit around a 1x6.

Board Width: As above a 1x6 will measure approximately 140mm wide. A 1x8 would be 191mm etc. The supplied model fits a standard 1x6 at 140mm. 

Bracket Thickness: How thick do you want the perimeters of the bracket to be? I've chosen 5mm which works well. This measurement drives some other measurements  so tinker at your own risk.

Bracket Height: The length of the "other side" of the bracket when used as an overhanging bracket. Ideally this should be as close to the width of the board as possible given the available height of the bracket. 120mm for a 1x6 is a nice compromise for using in both directions. 

Please enjoy!

Shelves Brackets

shelf for bags p1.stl

Traxxas TRX-4m Suspension Spacer 3.6mm

Suspension Clip.stl

Anycubic Mega X LED Strip Mounting Brackets

RGB mount6.stl

 Intel Pro 1000 4 Port Full Height Bracket 

 Short Story Time. Had this card with a low profile bracket....didn't want to buy a full length bracket. 

The PCI-E Bracket is for the Intel Pro/1000 4 Port Ethernet card

This bracket is strong enough to plug and pull. Printing with PLA is fine, if you print in another material let me know please, would love to hear the results. 

Instructions to print 

    You must generate supports! If you are using Cura I recommend setting your print settings to advanced. 

    Support structure must be Tree
    Touching build plate
    the rest of the settings are up to you for supports (default worked for me)
    infill was set to 20% but that is only a recommendation*

    Let me and everyone know if any settings have better results.
    the hole is for a M3 insert. It is not entirely necessary to be screwed in but recommended 

Nozzle cam bracket Ender 3 S1.stl

nozzle cam lid.stl

alice in wonderland bracket

alice in wonderland bracket.3mf

VESA Mount Adapter 200x200 to 200x400

vesa_200_to_400_bracket.stl

Creality E-Fit Cable Housing

I designed this to fit the Creality E-Fit direct drive extruder upgrade.

This fits over the top, keeping the hot end wires and fan wires stationary while the X axis moves. A zip tie slot at the top secures the cables in position.

I printed in resin because of the awkward dimensions but you may be able to make an FDM version.

Shelf mount OR Box Holder

I made this little thang to hold up a small shelf I was working on in the woodshop.


U Bracket

U Bracket.3mf

ClosetMaid, Shelf Bracket Hook

ClosetMaid, Shelf Bracket Hook.stl

Angled Dowel Rod Bracket

angled-dowel-bracket_for_orca.3mf

Direct drive Extruder bracket (Ender 3 v2 neo)

Direct drive Extruder bracket v3.stl

Aqara Presence Multi-Sensor FP300 Mount

Aqara FP300 Mount.3MF

Gearfinity Handle Plate Bracket

handle_plate_bracket_half-1.STL

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Rack

Freezer Handle Bracket (GE REPAIR/UPGRADE)

freezer_handle_bracket.step

Freezer Handle Bracket (1 side) - White Matte Plastic

Freezer Handle Bracket (both sides + spare nub) - White Matte Plastic

BRACKET

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

teacup bracket

NEMA 17 Bracket

2-Way Parametric Shelf Bracket

Shelves Brackets

Traxxas TRX-4m Suspension Spacer 3.6mm

Anycubic Mega X LED Strip Mounting Brackets

Intel Pro 1000 4 Port Full Height Bracket

Nozzle cam bracket Ender 3 S1.stl

alice in wonderland bracket

VESA Mount Adapter 200x200 to 200x400

Creality E-Fit Cable Housing

Shelf mount OR Box Holder

U Bracket

ClosetMaid, Shelf Bracket Hook

Angled Dowel Rod Bracket

Direct drive Extruder bracket (Ender 3 v2 neo)

Aqara Presence Multi-Sensor FP300 Mount

Gearfinity Handle Plate Bracket

Headphones Bracket for 37 mm Tube on Alesis DM10 Studio Rack

Freezer Handle Bracket (GE REPAIR/UPGRADE)